M2 cable for the OR2800 is $1.97/foot regardless of the length. It is 2, 12 gauge and 2, 18 gauge shielded in a PE jacket. Said to be custom made. Any known alternatives for such a cable? I suppose I
Author: Henk Remijn PA5KT via TowerTalk <towertalk@contesting.com>
Date: Wed, 4 May 2022 07:50:14 +0200
Like this: https://www.amazon.com/50-FEET-18-AWG-SHIELDED/dp/B01GZ50P7Q You can also do 2-wire shielded of each size. 73 Henk PA5KT Op 4-5-2022 om 06:33 schreef al.n6ta@gmail.com: M2 cable for the OR
Al, I also bought mine from The Wireman. I also wrapped 5 turns through two stacked #31 ferrites at each end. 73, Steve N6SJ https://thewireman.com/product/306-premium-rotor-cable-2x12ga-2x18ga/ Rich
I assume that the shield is just on reed switch wires. It's easy to purchase two conductor shielded cable or even use coax and the motors can be run with semi-inexpensive THHN. If you have a long run
I recently needed a two conductor cable for 12vdc power to an obstruction light. Wasnt happy with the flimsy stuff I had and instead used RG-6. Pretty cheap and rugged. Stan, K5GO/ZF9CW _____________