Hi Terry, If you are going with light elements, as I believe I read in your posts, then truss cables can be used to help stabilize the elements both in the vertical and horizontal planes. There is a
Have you not considered the 40m "moxon" that K3LR is using? Look on his website for info. 73 jim ab3cv _______________________________________________ _______________________________________________
Thank You Matt, Your suggestion has sounded the most useful to me. I will say I do hate dealing with Copperweld and have avoided it but we will see. I do have the stuff from the 160 meter coil to tur
There are detailed plans that turn a 2 ele XM240 or the earlier version into a Moxon. I recall that it was pretty straight forward. You can raise the antenna about 30ft or whatever is easiest in th
Hello again, Checking my stock of parts I find I have (2) 2" X 6' X 0.120" Thick wall aluminum; (2 or more) 1.750" X 6' X 0.120" TW AL; (2) 1.500" X 6' X 0.120" TW AL. The reason I did not build the
Sorry, should have said Boom-To-Mast t _______________________________________________ _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.con
Terry, That would be a lot closer to how I am building mine. After telescoping, typically 1' per joint, I have 6' 2" x .120 wall, 5' 1.75" x .120 wall, 6' 1.5" x .120 wall (they were 7' sections). Th