I'm looking for the following if your willing to ship or within driving distance of Amarillo, TX 1 each: 1 1/4" x .058 x 60" swagged at one end 2 each: 3/4" x .049 x 60" sagged at one end Thanks Rich
1 each: 1 1/4" x .058 x 60" swagged at one end 2 each: 3/4" x .049 x 60" sagged at one end Thanks Rich - N5ZC I would think M2 would be happy to supply it - their entire factory is full of machines
I agree, finding the proper sized swedged tubing elsewhere would be quite difficult. Shipping 5ft or 6ft packages is done all the time and most businesses have discounted shipping rates. I have purch
Several years ago M2 would supply it. I needed some pieces for a KT36XA that were bent in a tornado and they did it. Perhaps they have changed but I doubt it. 73, Larry W6NWS 1 each: 1 1/4" x .058 x
An alternate solutionEvery time I have seen or worked with swedged tubing on a beam, the swedged portion has reduced the diameter by 2 sizes, for example 1 down to 3/4 o.d. You can accomplish the sam
Tom, I have considered this idea as a backup plan. Ordering directly from M2 is an option, albeit the most expensive option. This is why I'm looking for pre-weathered aluminum vs new. If I have to go
Another good new option is an outfit called Metal Supermarkets, which has locations in many major cities (but unfortunately, the closest one to Rich is in Oklahoma City). Their Baltimore location cu
"You can accomplish the same result by using a short sleeve of the intermediate sized tubing at the joint,..." I agree with Tom on that. I ordered several 40m verticals from Invonantennas (sp), a com