- 1. [Towertalk] Phillystran and cable clamps (score: 1)
- Author: Cqtestk4xs@aol.com (Cqtestk4xs@aol.com)
- Date: Thu, 8 Aug 2002 08:01:21 EDT
- I believe the 1200 pound old style Phillystran was used for the truss guys on the KLM antennas. However, they did not use guy grips or cable clamps...just a thimble and a cube about one inch square o
- /archives//html/Towertalk/2002-08/msg00239.html (7,738 bytes)
- 2. [Towertalk] Phillystran and cable clamps (score: 1)
- Author: ww5l@gte.net (Tom Anderson)
- Date: Mon, 12 Aug 2002 13:36:29 -0500
- I also use the Phillystran 1200 on a Mosley Classic 33 WARC with the 40m kit. Mosley supplies Dacron rope with the 40m kit for support and side to side stabilization, but the Phillystran had a lower
- /archives//html/Towertalk/2002-08/msg00368.html (8,943 bytes)
- 3. [TowerTalk] Phillystran and cable clamps (score: 1)
- Author: WBH3@daimlerchrysler.com (WBH3@daimlerchrysler.com)
- Date: Thu, 17 Dec 1998 09:05:10 -0500
- Steve: I am somewhat concerned over your comments, ref: item 5 below, where you say that "cable clamps and Phillystran do not mix"!! I recently put up a 15 foot Create tower on top of my house and ha
- /archives//html/Towertalk/1998-12/msg00253.html (11,011 bytes)
- 4. [TowerTalk] Phillystran and cable clamps (score: 1)
- Author: broz@csn.net (John Brosnahan)
- Date: Thu, 17 Dec 1998 07:28:24 -0700 (MST)
- Gerald at Texas Towers told me that the smallest I would suggest using four clamps, ala, follow the manufacturers directions. While three is the right number for EHS 1x7 strand the Philly tends to "f
- /archives//html/Towertalk/1998-12/msg00255.html (8,400 bytes)
- 5. [TowerTalk] Phillystran and cable clamps (score: 1)
- Author: DAVED@ctilidar.com (Dave D'Epagnier)
- Date: Thu, 17 Dec 1998 07:49:32 -0700
- Bill, the force due to wind on a surface is: f = A*(0.5p)*V^2*Cd where: f = force (lbs) A = area of surface (ft^2) 0.5p = 0.001188 (slug/ft^3) V^2 (V squared) = wind velocity (ft/sec) Cd = drag coefi
- /archives//html/Towertalk/1998-12/msg00256.html (13,414 bytes)
- 6. [TowerTalk] Phillystran and cable clamps (score: 1)
- Author: K7LXC@aol.com (K7LXC@aol.com)
- Date: Thu, 17 Dec 1998 12:14:34 EST
- use one size smaller than above. Cable clamps and Phillystran do not mix anymore.>> The current generation of Phillystran has a different PVC jacket material than the original did; it is softer and m
- /archives//html/Towertalk/1998-12/msg00262.html (8,067 bytes)
This search system is powered by
Namazu