Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[TowerTalk\]\s+Pre\-made\s+jumper\s+cables\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[TowerTalk\]\s+Pre\-made\s+jumper\s+cables\s*$/: 6 ]

Total 6 documents matching your query.

1. [TowerTalk] Pre-made jumper cables (score: 1): Author: SE060676@shellus.com (Effinger SH (Sam) @MSXSOPC); Date: Mon, 18 Aug 1997 09:23:35 -0500; I am in the process of hooking up my Top-Ten Devices switch boxes with the A/B switches and need to buy some pre-made coax jumper cables. I need them about 3 foot long and made of RG-8x or higher qua; /archives//html/Towertalk/1997-08/msg00521.html (8,286 bytes)
2. [TowerTalk] Pre-made jumper cables (score: 1): Author: w4an@contesting.com (Bill Fisher - W4AN); Date: Mon, 18 Aug 1997 11:13:57 -0400 (EDT); You should be worried. N4RJ ordered some phasing cables from a well advertised outfit in south Florida. Cut to order with connectors. After a couple of months of problems with that stack we took out; /archives//html/Towertalk/1997-08/msg00522.html (8,474 bytes)
3. [TowerTalk] Pre-made jumper cables (score: 1): Author: k1vr@juno.com (Fred Hopengarten); Date: Mon, 18 Aug 1997 13:55:42 EDT; 1. Don't allow coax coming out of a connector to make a sharp bend. Something will eventually fail. 2. Don't put a BNC with a UHF and then coax without supporting the coax somehow to avoid breaking s; /archives//html/Towertalk/1997-08/msg00528.html (8,675 bytes)
4. [TowerTalk] Pre-made jumper cables (score: 1): Author: tgstewart@pepco.com (tgstewart@pepco.com); Date: Mon, 18 Aug 1997 15:06:23 -0400; At the risk of sounding like a broken record, let me recommend RF Connection in Gaithersburg, MD for anything you need along those lines. They sell the materials at great prices, are very knowledgeab; /archives//html/Towertalk/1997-08/msg00529.html (9,721 bytes)
5. [TowerTalk] Pre-made jumper cables (score: 1): Author: donovanf@sgate.com (Frank Donovan); Date: Mon, 18 Aug 1997 21:35:11 -0400 (EDT); Sam - I highly recommend RF Connection. A laqrge part of their business is pre-made RF cables. You can reach their home page via the PVRC Homepage http://www.pvrc.org 73 Frank W3LPL donovanf@sgate.co; /archives//html/Towertalk/1997-08/msg00545.html (7,747 bytes)
6. [TowerTalk] Pre-made jumper cables (score: 1): Author: dick@merlin.libelle.com (Dick Flanagan); Date: Tue, 26 Aug 1997 16:02:54 -0700; Thanks very much, Dave. Yes, several people have responded that the RF Connection in Maryland is the place to go for the cables. Thanks, again. . . . 73, Dick -- Dick Flanagan W6OLD CFII Minden, Neva; /archives//html/Towertalk/1997-08/msg00743.html (7,729 bytes)

Current List: 1 - 6
Page: [1]