I am rebuilding a well used HG-70HD. At some point in its life the cables were replaced. It now has 3/8 inch wire rope for the lower sections and 1/4 inch for the upper sections. In both cases wire c
Thanks Mike! I had planned on replacing the cable myself. Swaging tools and aluminum ferrels for 1/4" cable are easy to come by locally. As I replace the old cable I will snake the new stuff right be
Sure. Let me see what I can do. I have the original which should be easy to copy. Rich --Original Message-- _______________________________________________ ___________________________________________
Good idea Allen. I have the winch option for my 52SS including the remote control. I confess that I much prefer to be at the tower base when raising/lowering. There is not much original left as the c
I second your comments, Rich. I have the remote control for my MA-550MDP tower but I always raise and lower it from outside. Aside from the satisfaction (and security) I feel watching it go up and do
Look for a washer or dryer tub and set it at the base of your tower. The natural coil of the coax will wrap itself around the tub when lowering the tower and unwrap itself effortlessly when raising t
Do you have a single coax going into the tub or a bundle of coaxes and control cable for the rotator? Thanks, Gene _______________________________________________ ____________________________________
Gene, I have the coaxes and rotator control cables bundled/taped from the top section and fed through each guide ring mounted on each section to the ground. The wash tub is setting upside down next t