Well, it looks like the brake on my T2X has finally thrown in the towel. I have ordered a repair kit from Champion. However, my main concern is getting the rotor out with the minimum amount of surger
I added a winch to the top of my LM-470 so I can raise the mast up far enough to allow easy removal of my T2X (or lower the mast down far enough to work on the antennas). I also installed a U bolt on
Dale, Rick, Paul and Geoff: First of all, many thanks for your helpful replies. Because I didn't provide sufficient detail, all of you assumed that I was going to try to remove the rotor with the tow
On the tower I just bought (used) I notice that the rotor mount plate is notched at the 3 corners in such a way that if the U-bolts that attach it to the tower legs are removed, the rotor plate can t
Almost, but its not quite that easy, Jerry. The mast is generally in the way and must be lifted upwards a bit to allow for room to remove the rotator and/or rotator plate. There is an easy way to do