OK, The Henry 6&2 amplifier is still available. We are NOW entertaining reasonable offers for same.. (no lowballs please! - thanks!) bill, K1DY Hi guys, I am selling this amp for Stan, K3IPM. It's a
Hi gang, Gotta raise some cash for a new vehicle since i totalled the rovermobile.. Here's what i have: HP 8620C sweeper mainframe (no plug-in but works perfectly) $50 + ship HP 8743A Reflection-Tran
The whole lot is sold!! Thanks everyone who responded!! bill Hi gang, Gotta raise some cash for a new vehicle since i totalled the rovermobile.. Here's what i have: HP 8620C sweeper mainframe (no plu
Hi gang, I have one of the "low power" UM2683B Toshiba 3456 amps, brand new still in the bag, and a nice chunk of heatsink extrusion (10" x 7" x 1.5") to mount it to. This is the "20 watt" amp not th
Hi gang, I posted this last wednesday and it never came thru.. in fact I never received any postings from this reflector until today, and alas my posting (beloe) was not one of them.. Oh well I shall
All 3 of the amps are sold!! Thanks to all who responded! bill, K1DY _______________________________________________ VHFcontesting mailing list VHFcontesting@contesting.com http://lists.contesting.co
Hi gang, I just did some tower work for a local ham and ended up with a 40 watt DEMI 1296 transverter!!Soooo.. I now have available a DEMI 1296-144 transverter. This is the original one with hairpin
both transverters and the preamp are sold.. still have the 1296 amp and the HTX100 thanks to all who responded, bill K1DY in Maine rt _______________________________________________ VHFcontesting mai
Hi gang, I have a DEMI 1296-144HP2 "25 watt" transverter for sale. It looks mint because it is practically unused and works perfectly putting out around 40 watts saturated power. Didn't measure the n
Hi everybody. This rotor and control came off the K1DY rover station. It's a 1980 HamIV with a HamII control box. This rotor is perfect on the inside, but has had the bolts that secure the brake ring
Jim, Thoughts.... How long, how many elements, how much gain on the Tonna 2M? This will determine the optimum spacing, BUT assuming they are similar in length to the 6M antenna, the spacing is probab
Hi all, Here's a complete 903 transverter/amplifier setup that i am selling which belonged to Stan, K3IPM, you may have worked it during the past couple January contests! All the gear has been used O
that was fast.. The complete setup is sold. Thanks everyone. bill o _______________________________________________ VHFcontesting mailing list VHFcontesting@contesting.com http://lists.contesting.com
Hi gang, Stan, K3IPM, asked me to forward this to the list. This amplifier really is in excellent condition. For those unfamiliar, amp works on both 6 and 2 with no retuning (not simultaneously obvio
Hi gang, Stan, K3IPM, has a really nice Henry Tempo 6&2 amplifier for sale. This amplifier really is in excellent condition. For those unfamiliar, amp works on both 6 and 2 with no retuning (not simu
Hi Rick and all, This is an interesting thread that brings up LOTS of issues besides just comparing a Moxon to a Yagi.. First of all a Moxon is, of course, just a 2 element Yagi with the ends of the
John, the antenna should work reasonably well. Yagi gain tends to fall off slowly below resonance and quickly above.. (So if you were trying to use a 432 yagi on 449 it would be a different story.) Y
whoa,.... I think knowledge of these kinds of openings on these bands would definitely attract casual ops, who, to my knowledge, don't have any idea these type of contacts are possible! I'm not again
Nope I just looked at the page and it's tonight oct 9.. 7-11PM local Bonne chance tout le monde! bill, K1DY _______________________________________________ VHFcontesting mailing list VHFcontesting@co
K1DY about to be QRV from FN54JQ if condx are OK (or just if I work anyone) I'll consider becoming K1DY/R and moving up to FN55 bill _______________________________________________ VHFcontesting mail