Hi Mike, There are a few brands of transverter's but the best I've used is Down east microwave stuff. I say this because I tried a few over 8 years of Contesting. I have the 222,903 and 2304 transver
After viewing the posted logs on the results page, i was wondering if the "paper logs" also get posted there does someone know of this? Tony NN1D _______________________________________________ VHFco
Alan, You really don't need to be technically savvy, transverter's are simple unless your trying to build one as a kit. Without going into details, and we can discuss that off line, it?s a simple int
Allen, In this case, it my be wise to get a TIB, and when you switch the TIB To on it triggers the ALC in the radio to a lower power setting. And when you shut it down, back to normal power so you do
Oops. Sri Allen, Wrong Info about the power. At least I'm still covered, my 903 is 10 watts and the 1296 and 2304 is less then 10 watts Tnks Steve for getting it straight. Tony NN1D Computer Services
I don't usually get involved in these debates, I normally just watch along with many others, but what you're asking here has been done, noted below... Your personal log is not public, but your "conte
Good lord, someone needs to go watch TV for a while... Sent from my BlackBerry® smartphone with Nextel Direct Connect Heres a clip from the future. June Intergalactic VHF sweepstakes review QST 2032
You forgot one Jim, Is It fair i have a cooler in the shack for cold Beer and you don't in a rover? heh heh.. just trying to lighten things up a bit before it gets nutz again.. Tony NN1D ____________
Some time ago I do recall a thread here, about a rotor control box that runs under 12 volts. Designed for rovers but it was a bit pricey Tony NN1D --Original Message-- From: vhfcontesting-bounces@con
Jim, i don't know about the switch's but it sounds like circulator is still in there, didn't you remove it? i did the 150w PA with no issues, and the idle current is less then 1 amp, sounds like ther
Hi Jim, And welcome back, not jumping the gun here but the point was not be so eager to give up specturm, uless it's a must and were forced. The idea is to be aware of others and what others are doin
That a nice idea, if you have split RXIF and TXIF Tony NN1D _______________________________________________ VHFcontesting mailing list VHFcontesting@contesting.com http://lists.contesting.com/mailman
And power lines unless you want to go back to the 50's Watch out for bridges! Perhaps I should mount my homebrew delta loop on my van? http://kd4e.com/deltaloop6m1.html His does look a lot nicer ...
NN1D will also be on from the Lonely FN41JR with just 6&2 This time around. But I'll be there! Tony NN1D --Original Message-- From: vhfcontesting-bounces@contesting.com [mailto:vhfcontesting-bounces@