Also my thanks to K9JK es W4SHG for keeping sprints alive. However, I only managed to work one station in FM08us (KI4GZY). I even called Jerry, KN4SM, but his rotor was stuck and he did not get on. S
You should do this yourself. If you click on the link: shown below, and here for your convenience: http://lists.contesting.com/mailman/listinfo/vhfcontesting scroll down to the "unsubscribe" portion
I think that you did the right thing. One thing I don't understand, (or maybe I am perceiving thing a little incorrectly, i.e. maybe it is not the case) it seems to me that everyone tries to get on t
JT, I'm not an ME but I thought that I would respond anyway. The trailor hitch end sounds ok except, I would be sure to use some black dacron antenna rope for guys to the front bumper or other solid
I'll be on in FM16ts so please point my way once and awhile. I'll look for you per you schedule. Thanks. 73, Bill, WF4R _______________________________________________ VHFcontesting mailing list VHFc
Much easier if you simply right_click and do a "save target as" navigate to where you want to save the file and click "save" 73, Bill, WF4R _______________________________________________ VHFcontesti
I will be on and looking for some contacts from the NE and SW directions. Steve (W4SHG) I'll be looking your way at 22:10. Thanks for the heads up. 73, Bill, FM16ts __________________________________
I'll be looking for you Bill (VE3CRU) I hope the band opens for us. 73, Bill, WF4R (FM16ts) _______________________________________________ VHFcontesting mailing list VHFcontesting@contesting.com htt
Steve, Is this Teflon piece 1/2" diameter? If so, how long does it need to be? I think I can make you one. I have some 1/2" Teflon rod (quite long). If you still need it, let me know. I need to make
I've had very good success by drying stuff in the oven. Like what has been said before you want to get the water out as quickly as possible. Use caution on the temp setting though. My oven will not e
Hello Steven, I would say that the 500V cap would do the job. To do the job more neatly, I recommend that you replace the existing SM cap laid between the socket ground ring and the chassis with a 40
JON (W0ZQ), There is an article on http://mods.dk concerning improving the SSB modulation for the TM-255. You may want to check it out. "Improving SSB modulation of Kenwood TM-255 and TM-455" 73, Bil
Kevin, It is my understanding and belief that the actual length does not matter as long as the two coax's are the SAME length. Make or measure what length is necessary and then duplicate it for the s
I hope to be on from FM16ts with 11 ele at 75' and 125 Watts. Hope that I'm able to work you. 222.100? or what's your favorite frequency? I'll point your way. 73, Bill, wf4r -- Original Message -- Fr
DEMI makes a transverter interface kit (TIBK) that would solve the problem of power level input to the transverter. What it does in effect is to provide a steady dc level to the ALC input of the IC-7