Hello, I am setting up a log using the DXpedition Mode contest type. When I display the Band Summary, I only get a light blue window with "Score:0 QSO DX". No bands are listed in the white box below
I spent many frustrating hours of trying to make an FT 890 work with WL. I was experiencing a problem of the radio cycling off and on (rx audio off, rx audio on) about every two seconds when under th
I have WL 10.16B and cannot figure out how to configure the software for contest recording. In the Tools menu, Sound Board Options and Save Audio Snapshot are both greyed out. In the Help file, "Cont
I'd like to know how to do these things in Write Log: 1.) Do an automatic autosave to the a:\ drive each hour. 2.) Turn on the computer's sound so I can hear my CW keying from WL function key message
Hi WL Gang, I want to set up to record the IARU contest as I work it, but I can't quite figure out how to set it up in WL. The WL documentation leaves me guessing. Here is what I have tried so far: 1
Hello, I am new to WL and 'am having trouble getting it to CW key my radio. Here is the situation: I am using a keyline on LPT1. I have gone into WL's Setup and chosen LPT1 for CW keying and "PC Gene
WriteLog is a wonderful program for use in the WAE contest. It makes the handling of QTCs an interesting and fun part of the contest. I'd even venture a guess that WL has contributed significantly to
George, Tnx for the note. For sure, you are correct. Once a call is keyed into the log entry line, it does display the number of QTCs that can be sent to that station. The problem I have it that I wo
Don, tnx for the note. For sure, you are correct. Once a call is keyed into the log entry line, it does display the number of QTCs that can be sent to that station.? The problem I have it that I woul
I experienced the following problems with the OQP contest module: 1.) Inconsistent operation of the Check Call window. Normal operation of the Check Call window shows all bands on which a station has
Sooooooo, do you have a specific question relative to WL? 73, Geo... George I. Wagner, K5KG Productivity Resources LLC 941-312-9450 941-312-9460 fax 201-415-6044 cell ________________________________
You may have to pay for a new registration code. Wayne and Ron charge an annual fee to use WL. I believe it is $35. You can continue to use your current version of WL, but when you go to install an u
Joe, There is no "set up" per se in WL, other than selecting the correct radio (1000D, MP, MKV, etc.) so that WL can communicate with that radio. I am not familar with the radios you mentoned, but I
In a message dated 9/28/2003 10:04:19 AM Eastern Daylight Time, ak0a@kc.rr.com writes: I have a ICOM-718 set up on Com4 for rig control, however there is not 718 listed in RIG TYPE. What settings do
I loaded the new azimuth file and it works great with one exception. The VE provinces all work ok with the exception of VE1 which shows 322 degrees from my QTH in Sarasota, FL. VE9 shows 29 degrees,
1.) Click on DP1POL in the WL Log window for the QSO that is already in your log. 2.) Click on PREF field and enter CE9. 3.) Click on Enter This will change DP1POL to Antarctica. 73, Geo... George I.
In a message dated 9/29/2003 9:11:22 PM Eastern Daylight Time, writelog@W1QA.com writes: Launch WriteLog and enter some test calls ... Try a VE1, VE9 and W0 call. If your fix is good, the VE1 and VE9
In a message dated 10/1/2003 11:29:40 AM Eastern Daylight Time, henry@summitschool.com writes: but one thing that concerns me is checking for a new zone. When you input and set a call, it will tell y
2. enhancement suggestion - Select bands/modes for Packet Spot Window. Packet Spot Window: I would like to select each band and mode that I want to be displayed. (Like for RSGB 10/15 SSB, it would be