Was there an answer I missed. Saw someone else was having this trouble. After a wav. file transmit the mike goes to mute. Open the audio control panel and un-mute mike and mutes again as soon as I us
I did the same as you on 1/21... got it back in 13 min. 11:58Z to 12:11Z Sometimes it seems it takes longer than 13 min to boot up computer. Jim NU4Y _______________________________________________ W
Have been using WriteLog since Oct. 2000. Mostly Multi-Single. at VP5DX. In the last 10 years have only had to restart 3 times. None in the last 4 years (that I can remember). Restarts were due to co
When using ICOM rigs.... I built a band decoder under $20.00 including box and led indicators etc. We use this to switch Dunestar band filters (between radio and amp) and 1/4 wave stubs (after amp).
Yes the # will come up as the next # available (not logged) I had 37 duplicate #'s from VP5 a few years ago. All you could do is not type in the call until other station is not logging. This is not p
I don't do SO2R but do Multi-Single. I use the a band decoder from the radio to switch the Dune Star. No Filters on the other radio. The band decoder with filters on the Mult Radio. Run Station no fi
We have 2 computers connected with XP. Both are talking to each other, see freq. of other rigs. Can log on one and goes to other etc. Computer 1 is connected to telnet. Computer 2 will not connect to
We solved our problem by changing the switch between the two computers and the internet line. Same switch we used last year ?? Anyway it is fixed now. 73 NU4Y/vp5 at VP5DX -- Original Message -- From
In Parameter setup, only a State is suggested by the program. If you leave it blank, you cannot create a CAB file. If you insert, say YN , then the CAB output puts YN for sent exchange. Should be abl
What needs to be done is modify the CTY.DAT file. WL7RA needs to contact AD1C to make the correction. Then WL7RA would be ( K ) Zone 4 CO in the CTY.DAT file. Or, WL7RA needs to appear in more logs (
I know WL7RV. Cannot even copy written text, let alone phone and CW. WL7RA needs to contact AD1C to make the correction. Then WL7RA would be ( K ) Zone 4 CO in the CTY.DAT file. Or, WL7RA needs to ap
Ok , all set up, 2 computers, using XP, both up and running. Can see each other, have freq. from each radio showing in windows. Packet spots from telnet on computer A, computer B connected to local n
You are making this very hard, instead of easy. Assuming your setting up for CQWW cw. under Configuration: add a line that says. CTCompatibleAccel=Yes Uncheck, Country Prompt Uncheck, C Prompt. CW/RT
Sorry the typo. CtCompatibleAccel=Yes Also you don't get a complete call. say you get VE2 you just hit (F5) this sends VE2 you get the fill , hit the INS key etc. Assuming your setting up for CQWW cw
I am using the " General DXCC tracking log keeper " I added QTH to put in a State. Have used it all this year so far.. Should work for what you want. Jim NU4Y On 5/23/2014 14:24, ukbrown wrote: I do
We do multi-single all the time. Select your contest as normal. Set up your normal things as you would for a Single Op. (ports, exchange etc.) Under RADIO say this is RUN radio....... You will be pro
Not the .txt file for Writelog You download the zip file for WriteLog. Unzip and there will be an ( adi file ) When you set up your IARU contest... Under TOOLS the is Preset Exchange from ADI. You se
I have 2 computers running Win7. Using as Multi-single. Writelog V 11.14B Everything up and running, freq. and logs move as supposed to from one machine to the other. I can connect on Telnet to C