I try to always "translate" the cut numbers. ATT is 100, NN is 99, etc. Yes there is such a thing as a dumb question and here it is. Almost all of the DX stations send CUT numbers for the exchange an
I wonder why he didn't use SM#??? instead. What an awful call! Paul: I gotta second that, I was frustrated with the spots but I can see in the heat of contesting it was easy to call an "O" a zero. On
http://www.rttycontesting.com/writelog/commslot.htm With writelog SETUP/PORT SETUP writelog only lists COM1 - COM4 as usable COM ports. My PC has COM1, COM4 and COM5 ports. How can I set up COM5 with
Denis, If you have a 500Hz filter or 270Hz in the 8.33 use them. The 2.7KHz filter is asking for trouble on a mode where you need less than 200Hz to receive signals. 73, Bob W5OV --Original Message--
Jerry, You asked for a reply off the reflector. If you didn't get one, you should have said something. When you say that you "can, however, read Freq/Mode info", exactly what do you mean by that? Are
I am also curious why you have the number of radios set to 1. It should be 2. You have com2 set for: 9600,n,8,1. Is this what your PIEXX board is expecting? What settings do you have in the other sof
My questions remain unanswered: You (Jerry) have com2 set for: 9600,n,8,1. Is this what your PIEXX board is expecting? What about the Hex address for your radio? Does the PIEXX use a different addres
Jerry, What is different between the software that seems to work for you and Writelog? Can you look at the radio control settings of those programs and confirm that they're the same? Maybe write them
Rich, The issue is getting the LPT port to work with Writelog under WinXP. You will need to use one of the several available LPT Port drivers: Userport, DLportIO, et al. Once you do that, it will wor
The email you quoted was an email directly to you from K5KG. It was not through the list. 73, No wonder I get so much SPAM. Look at the first line on every post. Why does this email list insist on po
I think we've all had enough of this. Perhaps this will help. Step two simplified. A) Create a log file for the contest on one of the networked computers and save it. B) Copy that file onto every one