Never thought of that Joe! I'll give it a try later today. I think you made a typo though in the 706 address. Shouldn't it be: IC-706=0x48? 73, Gary AL9A _____________________________________________
After three days of this BS I'm at my wits end. Still no rig control under WL! I've reset the IC-706MKII CI-V hex address back to its default of 4E and entered the following line in the [Rigs] sectio
Thanks to the many who've responded. I should have been a bit clearer about my settings. I have the radio set to 19200 baud and am using that speed in WL, not Auto. The USB to Serial adaptor is the s
Not sure about the "D" class scoring situation. The "C" will probably never be used in a Field Day operation. What that is for is if you work a DX prefix that could be associated with multiple differ
Hi Henry, I never got it working via the USB to serial adaptor. It's worked before on an old Compaq laptop, but the new ASUS net book seems to have a problem. It's a mystery because the USB to serial
Check your keyboard keys on the F key row. My Microsoft Natural keyboard has a F Lock key just to the right of the F12 key. Every once in a while I'll fat finger that key when trying to hit the F12 k
Success!!! Many thanks to Jim NU4Y who put me onto the fix that finally solved my communication problem between my IC-706 and my ASUS net book computer. To review, the setup is a USB to 2 port serial
So Murphy owns a screwdriver! Who knew??? 73, Gary AL9A _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.contesting.com/mailman/listinfo/writ
Nick, I'm running Vista Home Premium 32 bit and can save changes to the writelog.ini file without a problem. Are you sure you are saving the correct ini file to the correct location. Under Vista ther
Ray, You need a second com port. If you're using com1 for rig control it cannot also be used for CW. Does your new computer have serial ports or are you using a USB to serial converter? Look in Windo
WL has been creating Cabrillo logs for SS for years! Not sure why you think it doesn't! 73, Gary AL9A _______________________________________________ WriteLog mailing list WriteLog@contesting.com htt
I'm suddenly having a problem getting the WL sound recording to work. I'm sure it is pilot error on my part, but can't seem to find the fix. I use the microHAM microKEYER II for my sound card device
Tnx for the reply Joe. You were almost right. It was a Vista muting problem, but not with the Line (microHAM CODEC). I had checked that several times. For some reason Vista had muted the Headset Micr
Mike, Please reread Ron's last paragraph. Lee recommends using port 23 instead of 7300. If this is done and something happens to Lee's server, which has happened before due to his ISP or the local po
I'm running WL on a Dell Inspiron 1720 laptop with Vista Home Premium. The built in sound card worked ok with WL, but did not register the 7F score. I don't recall what it was at the moment. Biggest
I'm setting up for the All Asia DX SSB contest this weekend as SOAB and have a question regarding band changes and how WL handles the 10 minute band change timing. The AA contest rules include a 10 m
True to form! Just getting ready for the All Asia contest and when I Show multipliers.. the window is a very small box with no info being displayed. Anyone know how to get it to resize? I'm assumring
OK, pilot error again! The Multipliers window for the All Asia contest doesn't show the prefixes of the Asian countries. It merely shows the prefixes that have been worked in the contest thus far. Wh
The little rectangle with a + sign indicates that your mouse cursor is inside this particular WL window and you can now reposition the window by clicking and holding the left mouse key while you drag
Ok, I'm now joining the multitudes of confused folks trying to setup the MMTTY plug in for the CQ WW RTTY contest coming up. I have the full MMTTY program installed at C:\MMTTY and it runs fine with