I will again be doing a Rover operation for the Minnesota QSO party in February. We will be roving through 21 counties during the 10 hour contest. Like most QSO parties, we are allowed to work the sa
What am I missing here?? Any advice or experience with the same soundcard is welcome. Thanks Ted; Unless there is something unique about your specific sound card, you should be able to accomplish wha
Problem is that the dates on the NAQP RTTY page are not the last FULL weekend, but the following weekend which includes the first day of March. The ARRL Calendar (hardcopy) lists it as 2/21 and 22. R
I have been playing around in WPX SSB and would like to use voice keying for the serial number. This used to work but, for some reason, I cannot get it to work this time. I used Windows Sound Recorde
The problem is WL is detecting an incompatibility between your wav files. Did you use different applications to record the wav files? The sample rate and bit size must be the same for all recordings.
Does anyone know if a Front Panel Add-In exists for the FT1000 Mark V that can be used with Writelog? I searched the archives and saw the questions asked a few years ago but never saw any answers. I
Couldn't find the answer to this in the archives. Is there a way to tune the frequency knob of the radio from the KEYBOARD? I know you can use the wheel on the mouse and I know you can enter a specif
Type a QRG into the "callsign" area. I think that works, although I'm still portable-W7 so can't confirm it on my rig. 73, de Hans, K0HB Hans; Yes - I realize I can do that. What I am looking for is
Sure it does. If your computer mouse has a scroll wheel (between the left and right hand buttons), it controls your transceiver's frequency. Scroll forward increases, scroll backward decreases freque
WPX contest is May 30-31, NOT 23-24 as per WPX rules. I was confused also as I had seen the wrong date in NCJ and QST Kevin; I wonder where you saw the wrong date in NCJ? The Contest Calendar in the
I am having trouble getting my new SIIG PCI 4 Serial Port board to key FSK. I have a PC with one built in Serial Port. The built in serial port (at COM 1) keys FSK no problem. When I install the SIIG
Al, The only time I have seen a problem of crashing the PC with FSK on a serial port, if, and only if I had accidently choose a PK-232 Modem and configured it to a virtual serial port. You can check
Does anyone know of a single channel USB to 9 Pin Serial Converter that will work on RTTY? I know they are getting very hard to find because of the 5 bit keying. I picked up an IOGEAR USB / Serial in
Another option for a desktop is to use a PCI card that provides additional real COM ports. They are available from computer builders and people who put together cash register systems. I added 4 COM p
Specifically, which apps have you tested? 60 WPM FSK RTTY? CW keying using handshake lines (DTR)? Did you have any trouble getting the driver to work? Some of these adapters come with eleventeen driv
I know that I've used it with WriteLog for DTR CW, RTS PTT, 45 baud RTTY, and TXD/RXD rig control of my FT-1KMP. I've also used it with other programs like DigiPan, VE3SUN DX Monitor, Omni-Rig, and A
Hi Rick, I know that I've used it with WriteLog for DTR CW, RTS PTT, 45 baud RTTY, and TXD/RXD rig control of my FT-1KMP. I've also used it with other programs like DigiPan, VE3SUN DX Monitor, Omni-R
Hi Al, My driver version and date are the same as yours, 3.7.0.2 on 9/20/07. I'm set up for AFSK TX, so I don't usually use the TxD line to operate the rig FSK. However, I did a quick "crude" test by
This may not be a Writelog problem but I thought I would start here. I received a brand new FT2000D this week and just can't seem to get the CAT control to work with Writelog. I've used it with the m
By default, the FT-2000 requires RTS/CTS handshake. You will need a cable with 2,3,5,7 & 8 or you will need to disable handshake in the FT-2000 menu (check your manual) and disable RTS support in Wri