Hello Gents Just a small question: I will leave to Renesse in a few hours and I?m busy with Writelog and Packet ! I do only have one COM-Port (COM1 at 38400 baud) and one TNC2H with Firmware. I?m not
Hello ! I also had some problems with my interface ! Not the original one for YAESU but working fine with CT or WL on a "normal" PC. Just no chance to use this with my SATELLITE PRO from Toshiba ! Wr
Me too, and hopefully it will fix also my problem with my laptop !!! Regards de Jochen and a fine weekend ! Jochen ! PS: looking forward to test WL for the first time on the laptop during IOTA contes
Hello Gents ! During last IOTA contest I tested WL10.41B and felt a bit dissapointed. But maybe my mistakes...! Everything was doing a fine job, but.... ...I recognized following things: - No possibi
Hello ! I found my first problem: The interface I used is working fine with the PC but not with the laptop ! I tested one sold by WIMO and this works fine with my Toshiba ! Now I?m looking for an int
Hello ! I had no other probs here beside my CAT-control (now solved) and the CW-control (not solved yet) ! I also used latest WL version 10.41b and I also recogniced the problem while using space bar
I do have a FT847 here working fine with WL ! And in dead, pse check ur cable, the FT1000MP uses a "normal" cable and the 847 this fuc..... Null Modem Cable !!! Regards de Jochen ! PS: I still do hav
Hello ! Sorry for the Bandwidth Gentlemen, but due to the fact, that I do have a great FT1000MP V here but no antenna to use it or Writelog, I thought I could ask the Guys here on the reflektors...!
Hello Sir I tested N1MM (sorry, bit out of the reflector, HI) but used, my laptop with WIN XP and a second monitor to get all the windows working ! My laptop has a connector for an external screen, b
Hello Nick Please check wether the RTS/DTR settings are correct ! Do you have some more things running on the other COM-Ports ? I had the same problems here with homebrew interface and FT1000D: COM 1
Hello Rien ! Please check your firmware on the FT990 ! I believe, that at should be at least version 1.3 to work with every program. Regards de Jochen www.df0cg.de www.pi4cc.nl In Dutch: Kijk naar he