Hmmmm - I don't see a selection option there... Only a selection of which input to use of receive. Seems to me I have seen it in the past - but this is with XPpro - the selection IS present on a W2K
OK - well - things are odd - v10.46 - if I go into the .ini and under configuration and set soundboardindex=1 then I get the selection. But if I open the Writelog Mixer the selections are as other re
The problem I was having only came up when I was accessing the station computer via Xppro remote desk top AND trying to get the audio to the client computer using Skype - Xppro was the culprit. I sti
Right - and the problem with remote desk top was that I was running it from the client in the browser - when you have the Remote Desktop client software on the client PC you can select an option that
Not at all a problem - http://www.ionetworks.com/products/usbtoserialconverters/index.jsp - they work just fine! Don In case of pair of ORIONs one therefore will need 4 COM ports which may be difficu
Last weekend in CQP I was running two stations networked for the first time. Both were running XPpro (actually - identical machines with the exception of hard-drive size). In addition to losing the c
Thanks Brian, and the others who replied. Apparently it is covered in the archives, and also is not a problem - all that is important that the other station copied it correctly - not WHAT the number
I finally got around to configuring my modest home station for SO2R. I realize it is somewhat unique so not many are going to have the same issues. Here is the setup: 2 - K2/100 w/KAT100s (Running vi
The help file is rather vague on sending cut numbers. Where and what exactly goes into the .ini file? Tnx Don W6CZ _______________________________________________ WriteLog mailing list WriteLog@conte
Actually - I doubt they say that either. It probably says a signal report (depending on which contest you are talking about) as (part of) the exchange and sending 5NN for 599 is a VERY common and acc
I just noticed this in getting ready for SS, having finally got my station set up for SO2R. The CW keyboard window goes away when switching radios. Alt-K of course brings it back. WL 10.50D MK1100 2
My keys works as advertised - though I am using a MK1100 keyer here and serial keying on another station (which occasionally goes crazy sending garbage) with XPpro - do you have the memories programm
Maybe I missed this if this was discussed before - and I don't see it in the archives - but... Don W6CZ _______________________________________________ WriteLog mailing list WriteLog@contesting.com h
Ah - I don't think that is right Phil. It records those without it being checked - and when you do click on it , it brings up a series of new message fields that are pre-filled with <msg12.wav>, etc.
OK - Thanks - Found it. I thought I had seen it on here recently - but male pattern blindness got in the way :) Don Hi Don, Check the recent archives for instructions on how to edit the INI file or u
Right - got it - well - you can't have it three ways - you also loose the Shift + F# CW memories - unless you do as I did and create NEW keystroke combinations - I used Shift + Alt + F# - so NOW I ha
Carl, N4PY will be in booth 481 at Dayton showing his software - I use it with Writelog for remote control of my station, as well as adding dual-RX to my Elecraft K2. Well worth a look. Don W6CZ ____
Jim I am the "pesky" West Coast user he refers to - I have the remote station that he has been using for development - for one reason is that latency issues are a big problem and being 1/2 the world
Id there a way to turn the sidetone off in the ini file - the writelog website imples there is a command but gives no details. Don W6CZ _______________________________________________ WriteLog mailin
I am also getting this message after upgrading to 10.59 from a perfectly good working 10.50 - no - I am not trying to use DXtelenet - it doesn't let me get to the point of configuring how to connect