This weekend, I found a problem grabbing a spot of a station that is operating split. Rig is IC7800. The grab sends the radio to the spotted station's receive frequency and does not set split and the
Never mind. This was being caused because the radio is controlled by Ham Radio Deluxe and it feeds the info to WL as a Kenwood - the station is run remote over the internet hence the need for HRD. I
I have had a problem that I can't quite nail down the exact circumstances that it occurs - but when I go to respond to a call when using timed CQ the Echo Microphone button under Sound Board Options
I started looking for a simple, compact one radio USB>Control/CW/DVK/RTTY interface to use with my Icom or Yaesu radios for portable use and I found one. Thought I would share with the group. West
Probably larger too. The P&P is smaller then a deck of cards. The only complaint I have so far is the radio audio I/O cable is about 18" longer then the control & cw cables. I put all 3 cables inside
It is PC Generated. I haven't tried it in the "heat of battle" yet - just some breif testing. I'll let you know if there is a problem. I know of the problems associated with that method. I think is s
Right - I am hoping because it is portable, single radio and the current PC's have more "omph" that it won't be a problem. I have 4 of the W5XB/MK1100 boxes for the 2 (eventually 3) SO2R positions at
WRONG!!! There is no way that can be possible - It has to be an oversite/ignorance by West Mountain. The 765 is CI-V interface just like EVERY Icom since the 735 (though the 735 control code "word" i
Yes - about $30 more gets you FSK too with yours. Little larger. But also a good deal. Wish I could find a couple of the original MH Band Decoders. Message: 1 Date: Sat, 31 Oct 2009 10:08:28 -0400 Fr
Uning WL remote. Audio works fine, however Rttywrite only works on Baudot or ASCII. PSK modes dont show audio in the tuning window. Didnt check CW there but the WL CW decoder window is also not seein
Im not finding a way to activate the CW Keyboard on the client. Its greyed out under tools. The CW memory messages work. Is the solution to add a second WinKey and use WinKey remote? Im using an IC-7
I find myself being attracted to WSJT-X and FT8 as a mode conducive to QRP with my new IC-705 and also a new contest like activity POTA - Parks On The Air - and looking for solutions. Im a loooong ti