Author: Eric Rosenberg <ericrosenberg.dc@gmail.com>
Date: Thu, 24 Oct 2013 21:22:20 -0400
Are there overlays for the new categories? If so, where are they? If not, then what? 73, Eric W3DQ Washington, DC _______________________________________________ WriteLog mailing list WriteLog@contes
Author: Eric Rosenberg <ericrosenberg.dc@gmail.com>
Date: Wed, 13 Nov 2013 16:23:39 -0500
I'm about to migrate WL 11.x from my XP machine to a new Win7 Pro machine. Are there any 'gotchas' I need to be aware of, or other trips to pass along? Thanks & 73, Eric W3DQ ________________________
Author: Eric Rosenberg <ericrosenberg.dc@gmail.com>
Date: Wed, 18 Dec 2013 23:28:24 +0000
My station is a Ten Tec Orion 565 and a MicroHam Microkeyer II. I've had a problem with Writelog jumping around in its frequency display even if the radio hasn't changed frequency or is receiving, It
Author: Eric Rosenberg <ericrosenberg.dc@gmail.com>
Date: Thu, 19 Dec 2013 13:21:21 -0500
Steve -- If you've seen Joe's email, he said (and I highlighted) : Polling rate is strictly a function of the application - the microHAM interface forwards the application polls and commands as they
Author: Eric Rosenberg <ericrosenberg.dc@gmail.com>
Date: Sat, 21 Dec 2013 00:29:14 -0500
Steve, I went to test it all out and in the process replaced writelog.ini file from v 11.17 with the one from 2013 ARRL DX contest -- which used v10.something . For reasons I can't figure out, the cu
Author: Eric Rosenberg <ericrosenberg.dc@gmail.com>
Date: Wed, 25 Dec 2013 17:29:58 -0500
I think this is a WL issue, not a MicroKeyer II issue (I use a MicroKeyer II and am happy with it). The radio an Orion 565 with 2nd receiver. I installed v11.xx on a new computer but can't get the CW
Author: Eric Rosenberg <ericrosenberg.dc@gmail.com>
Date: Thu, 26 Dec 2013 03:12:34 +0000
I got the following error message when I brought up 11.17E this evening: "Error setting up device names for sound, Vista-style" 73, Eric W3DQ _______________________________________________ WriteLog
Author: Eric Rosenberg <ericrosenberg.dc@gmail.com>
Date: Thu, 26 Dec 2013 14:19:19 -0500
What are the correct settings for the audio devices using the WriteLog "Sound board mixer control" application before starting Writelog? I suspect this is in the manual or application notes. If so, I
Author: Eric Rosenberg <ericrosenberg.dc@gmail.com>
Date: Sun, 29 Dec 2013 06:04:47 +0000
Is there an alternative to Outlook for this function? I'd like to use a one-way only (sending) client that runs in the background. With the sending of a cabrillos, is there a way to automatically add
Author: Eric Rosenberg <ericrosenberg.dc@gmail.com>
Date: Thu, 16 Oct 2014 17:12:50 -0400
We used WL and N1MM for the W1AW/3 from DC operation. I'd like to know how long my station was on the air, and am wondering how the time is calculated. In other words, what's the trigger point that c
Author: Eric Rosenberg <ericrosenberg.dc@gmail.com>
Date: Mon, 17 Nov 2014 09:55:17 -0500
I used the latest WL this weekend. The frequency jumping issue with my Orion is gone (thanks, Wayne!), but I ran into a few unrelated issues, most likely operator error, that I couldn't figure out. I
Author: Eric Rosenberg <ericrosenberg.dc@gmail.com>
Date: Tue, 02 Dec 2014 22:02:47 -0500
Is there a module for this contest? If not, what does one use? 73 & Thanks, Eric, W3DQ Washington, DC _______________________________________________ WriteLog mailing list WriteLog@contesting.com htt
Author: Eric Rosenberg <ericrosenberg.dc@gmail.com>
Date: Sun, 07 Dec 2014 20:44:24 -0500
My station is a Microkeyer 2 and an Orion 565. My plan was to use MTTY as my RTTY engine w/WL for today's 10m RTTY contest. I was able to receive well, but on TX it wouldn't stop (unkey) after the me
Author: Eric Rosenberg <ericrosenberg.dc@gmail.com>
Date: Mon, 8 Dec 2014 05:27:05 +0000
That's how I've always set it (CW PTT = NO) Changing that parameter makes no difference. It just keeps transmitting.... Could I have set something incorrectly in the MK2 router? 73, Eric W3DQ -- Date
Author: Eric Rosenberg <ericrosenberg.dc@gmail.com>
Date: Thu, 29 Jan 2015 10:58:58 -0500
Writelog will work as-is (accept the QTH) with the new NA SSB Sprint contest. However, it will not calculate the scores correctly. The Cabrillo generated by the program will include what you enter...
Author: Eric Rosenberg <ericrosenberg.dc@gmail.com>
Date: Thu, 29 Jan 2015 14:06:23 -0500
As pointed out, I forgot to add KH6 as a new multiplier. If you read the namedmult guidelines file in the c:\ProgramData\WriteLog (or with XP, c:\Documents and Settings\All Users\Application Data\Wri
Author: Eric Rosenberg <ericrosenberg.dc@gmail.com>
Date: Thu, 29 Jan 2015 20:33:39 -0500
I've played with a variety of permutations to the namedmult.ini and nothing works. I can only guess that Hawaii is hard-coded as a country, not a NA mult, as per the NCJ rules. But then again, I'm no
Author: Eric Rosenberg <ericrosenberg.dc@gmail.com>
Date: Sun, 1 Feb 2015 04:30:38 +0000
Thank you Wayne for your guidance in editing the namedmult.ini file for this contest on such short notice (2 days) As WL already accepted the mult as typed, only the scoring and mults screen was impa
Author: Eric Rosenberg <ericrosenberg.dc@gmail.com>
Date: Mon, 21 Mar 2016 21:33:49 -0400
I just moved to Win10 and v12.03 Bring up WL gives me hte following error message: \ "Error setting up device names for sound, Vista-style" What does this mean? Set-up is a TenTec Orion,Win10, MicroH
Author: Eric Rosenberg <ericrosenberg.dc@gmail.com>
Date: Thu, 4 Aug 2016 22:54:38 -0400
I have a N1MM+ call history file in .CSV format that I want to use with WL (assumingit's the same as writelog.ini) How do I convert it? 73, Eric W3DQ _______________________________________________ W