Has anyone thought of authoring a reference source of Writelog information in a format such as :- WRITELOG FOR DUMMIES. Those who are familiar with the "Dummies" series of books will appreciate the q
Roger, Glad to hear that you finally id'd the problem. Yes, writelog.ini is the heart and soul of WL. Unfortuantely, the Help documentation for the writelog.ini commands is not totally complete, whic
I am able to connect to Telnet sites using HyperTerminal but not with the WL Packet Terminal. My writelog.ini file contains: [OBJECTS] pktObject=writelog.pkt.9 Any suggestions as to what is preventin
Gave you tried accessing another node. I just did a SH/ST K5KG and see that you show K1TTT which is currently down. You might try mine and see if that makes any difference. Just telnet to n7us.net. J
When I switched from Sprint Broadband Direct (MMDS - 2.4 GHz RF) which used a cable modem to DSL I could no longer access my AR-Cluster node using the internet IP address. I had to use the internal L
The band change window when selected for "10 minute" operation counts down from 60 minutes. It should be from 10 minutes to be of use for M/S stations. We also found that the band change window did n
Some changed settings are not saved when I exit the program i.e. "Enter sends exch/QRZ" "This Window is RUN (A) Radio" or a changed FONT for the Beam Heading setup does not hold after a new program s
ComponentMoveData Error Carl, I don't know the solution to your problem, but I can suggest that you enter "ComponentMoveData Error" into Google and see what you get. Frequently error messages can be
Running XP and just installed the MicroHam USB interface to the FT1000MP. Are there any special things I should know about the "ports" setup in Writelog, and, do I connect the PTT line to the MP in a
What is the writelog.ini command that causes hitting the SPACEBAR to enter a callsign in the LOG ENTRY window into the BAND MAP? I can't find this in WL Help, but it must be there somewhere! 73, Geor
I am trying to generate a Cabrillo for the WAQP Salmon Run, however, all of the drop down menu boxes for (ARRL Section, Power, Mode and Band) are blank. This leaves me no way to enter this informatio
I am setting up CAQP and want to know how to keep the mult window from disappearing everytime I do something. What do I do? I wanted to save setup, but in trying to do that, the mult window disappear
I am new to WL and have a question relative to parameter setup for this contest. In some contests one needs to do a Parameter Setup under Contest. In CAQP (outside state), the Parameter Setup does no
In a message dated 9/27/2004 7:36:12 AM Mountain Daylight Time, mtyler@metrix1.com writes: Mtyler, I will try to help you with this, but I don't really understand your questions. I am not sure if you
The best way to handle this is to have a "journal" file which stores all WL does maintain a journal file. If your computer crashes for some reason, WL will ask you if you want to save the journal fil
When CQP (instate) is selected, the default Bands are the entire bands with all modes (e.g. 3500-4000 kHz, LSB, USB, CW)--no subbands. But when typing a frequency into the CALL field the mode does no
I have been playing with CAQP and want to delete what I have entered before the contest starts this afternoon..Where is the log and how do I delete it. I want to retain my config stuff. Mike, It is v
That's the point, George--WL does not do that in this mixed-mode contest. I tried subbands with and without overlap or intersection. e.g. 3500-3750 CW, 3750-4000 LSB. I could go from 3505 to 3795 OK-
I use an external CW paddle connected to a DX Doubler. Is there a way to configure WriteLog to allow use of the external paddle? Nope, not that I have ever seen. The last program that I had that coul
Dennis, Here is an excellent source of WL information: _http://www.k9jy.com/_ (http://www.k9jy.com/) 73, George, K5KG/7 _______________________________________________ WriteLog mailing list WriteLog@