Today I was able to get Writelog and the Elecraft K3 working together on my Vista 32 bit operating system. I changed the Serial to USB connector from one with a Prolific chip set (sold by Elecraft) t
I have now completed the preliminary tests under a Vista 64 bit environment. I am able to get Writelog to communicate to the K3 - receive (frequency and mode) and send (send K3 to spot frequencies an
Thanks to Wayne, I now have everything running in a 64 bit environment too. I had a slight error in my Writelog. ini file (com port setting was wrong - correct code is [RIGS]com1:=38400,n,8,1 ) that
You will find in a later post on the Writelog user group that I now have everything working, including CW and RTTY. Irwin From: Garry Shapiro [mailto:garry.shapiro@gmail.com] On Behalf Of Garry Shapi
MMTTY plug in has disappeared in my RTTY (TU Type) pull down window. I have reloaded MMTTY and the Plug in and it still does not appear. Any suggestions? Do I need to make a manual entry in the write
This has already been reported. It seems to be solved in a new version (10.74e) that is under beta testing. When I close the packet window while still in Writelog, it just minimizes it. When I close
I am running Writelog on both a 32 bit (desk top) and 64 bit (laptop) Win 7 computers with no problems. Our VE2DXY team during CQWW ran Writelog on two 64 bit computers (one running Vista and the oth
Jim, In the RTTY contest this weekend, I used Writelog with MTTY with no major hick-ups. My setup: Elecraft K3 Radio Dell Dual Core 32 bit running Windows7 OS I have also tested Writelog on my 64 bit
I am having trouble getting Writelog to recognize my Icom 706MKIIG for rig control. I seem to remember something about a set of lines I need to add to the Writelog ini file? Any recommendations would
Wayne, If I have this correct, the file for the ARRL Dx (CW or Phone) should read like this: The wlSummary object also has a Score property Getscores.Score = wlSummary.Score Getscores.QSOCount("160")
I would appreciate some assistance with the Keyboard Commands function with my K3 Radio. My objective is to create Function Keys (i.e. F10) that plays the DVK messages, etc. In the Writelog.ini files
I did an update of the WL_CTY.DAT files using the Writelog Utility. I am now getting the following error when I open Writelog "Can't open DXCC Data base file DXCCWAE.DAT and then Writelog crashes. An
Jim, Thanks, works fine. I am getting ready for contesting season. Our contesting team is VE2DXY in CQWW SSB from Zone 2. Regards, Irwin --Original Message-- From: jjreisert@gmail.com [mailto:jjreise
I am attempting the same thing with no luck. I have entered in my Writelog.ini file the following commands: [Elecraft_K3_commands] Macro_10=SWT21; Where SWT21; should play message number 1 from the K
I had Writelog set for FSK - LSB setting. All of my LSB calls in the PA QSO contest are being logged as FSK. I have changed the setting. How do I correct the Log entries? Thanks, Irwin Darack - KD3TB
I had the same problem. My email is set for HTML. I re-set it for text and the Cabrillo file went through. Irwin-KD3TB --Original Message-- From: writelog-bounces@contesting.com [mailto:writelog-boun
Bob, Have you loaded the MMTTY-Writelog Plug-in (MMTTYPluginforWritelog_V13.Exe)? Here is my experience with using MMTTY with Writelog. Today I loaded the newest version 1.68A, The version worked, bu
When I open Writelog, I get an error statement - "Error setting up device names for sound, Vista- Style" When I click okay- it goes to Writelog and everything works fine? OS is Windows 7 - 32 bit . I
Does Writelog have a set up for the Delaware QSO party? Or a generic QSO set up? Thanks, -- Irwin KD3TB _______________________________________________ WriteLog mailing list WriteLog@contesting.com h
I'm running win 7 32 bit and keying CW. Radio is a K3 and sound card is an external Sig USB.WL version is 10.83e. If you plug an external speaker in , do you here correct CW from WL in the speaker? T