I have been unable to successfully record a .wav file to be used by Writelog. I can record a file but the audio level is quite low and when played back the digitization noise level is high and the sp
I seem to recall a suggested attenuator for the line out from the sound card to the mic input. I checked the Writelog and also K9JY help files for interfacing and do not believe it is there. I have j
Thanks to all who made numerous suggestions. It turns out that a mic pre-amplifier solved the low drive problem (actually the mic input on one card was defective and used the line in). I built up an
I know this must be documented, I did my WAE log but now can find the help file to spell it out! Thanks in advance for your assistance with my poor memory. 73 W3TMZ
I was looking for a way to modify the keying characterstics when using the internal PC generated CW. It would be nice to at a minimum increase the space between characters. It would also be nice to m
I have installed the plug in but did not install in the same directory as WL and MMTTY which are in the same directory. I am presuming that the plug in ties WL and MMTTY together. Help! 73 and tu Jac
I see that the receive baud rate is adjustable and can only presume that the transmit baud rate follows??? I looked in the help files but an answer did not jump out. 73 and thanks Jack, W3TMZ
Has anyone interfaced a Yaesu FT-100D with Writelog and if so, what interface between the computer and the radio was used? Thanks Jack, W3TMZ _______________________________________________ WriteLog