I've found NetdePC useful when I just want to see what's going on while doing other work, quick check of propagation indices, etc. But, NetdePC doesn't seem to interface with WL or any other software
The CMI 8738/C3DX PCI Audio device is embedded on the motherboard of my Soyo Dragon Pkus (Athlon 1700+) machine. Rating 7F on the SB Check utility. It works flawlessly with WL, MMTTY, CWGet, etc. In
Ditto for 35mm film containers. Still using the half-dozen I started out with for RTTY interfacing, then re-used for other circuits. A cut-down terminal strip will fit inside to provide tie-points.
Mel, It's a Kenwood issue. The FSK polarity selection for the 850 is menu setting number 11. I'd bet it is now set to OFF, the default value. Try setting it to ON for mark, and you should never have
Try SmartClock from this excellent site -- I've been using it for months and really like it. http://www.backwater.cz/chmelar/index.php?lng=en 73, Jon K1US New user to writelog here, in preparation fo
This is so sad, I'm interrupting my efforts with the XE RTTY test for a quick comment. During my years as a comm and ops officer in the USN Pacific Fleet in '60-'63, the RMs were a great bunch. Your
This is just a heads-up note to those using the UserPort driver to provide LPT keying under WinXP. There are apparently some unwanted interactions that can cause problems, and even lead the driver it
Thanks for the comment, Jerry. I had explored every option I could find before going with UserPort. The others may have their good uses, but I've never gotten any to work with WL. One is relatively c
I've also been very pleased with CWGet. Worth every penny of the shareware registration fee. I keep two smallish windows running, one for each radio in an SO2R setup. Having to type the callsign into
Jim - Yes, and also no! RITTY wants exclusive use of the sound card. It permits only one instance and one sound input. While there are multiple input choices inside RITTY's setup screen, you can only
Hi all -- Still good advice, but to keep the record straight the one I tested and posted about was the eternal audio system, the Extigy. I think the basic "innards" are the same as the Audigy uses, b
Daniel, For these options to work, you have to open the RTTY window and select as TU Type, "Stereo Sound Board AFSK." Only then you can choose CW for decoding. 73,
I can't tell from your post, but it's possible you are trying to run Setup from inside the zip file. Try creating a new folder, then copy everything into it, then run Setup after doing that. It might
And as has been posted _*many*_ times here, the LPT keying driver is free, takes five minutes to install, and works perfectly. This is not a problem for anyone with even moderate computing skills. ht
For these ATI Radeon 7500s @64mB RAM as well as their 9000 line, BestBuy.Com shows the following info: "Dual-display support for CRT monitors and TVs with HYDRAVISION software" The prices are about $
Jerry, Don, et al Jerry's post and Don's reply alerted me I'd better check this out, as I haven't run my dual MMTTY instances on two sound cards / one computer since upgrading to MMTTY v 1.63. It had