All, Thanks for all the hints. I was able to use msconfig (which I have used millions of times in the past but could not think of it) to stop the automatic loading of several programs. The trick to m
Rick, This is easy with Win XP. Caution - this is from old memory as I haven't been on Win 98se for a long time. With Win 98, I think that you will need to feed the same audio stream to both cards. T
All, With the CQWW DX RTTY coming up this next weekend, check your namedmul.ini file in the writelog programs directory to make sure you have a corrected version. You can download the current file fo
Barry, The only change from the 2004 version was to the HA DX contest. The 2004 versions are correct for the cqww dx rtty contest. In fact, reading my change history, all versions from 22Sep2003 on (
Rick, Not much help (it is too early in morning for brain to wake up) but I see that I have a "special" cable I make to take my Heil Icom mic to the sound card. There is something you have to do. Aft
Bob, This is the same problem I have had ever since I tried to take band data from the Icom CI-V Buss. It just does not work! I think there are just too many collisions on the half duplex buss. Write
Joe, I read you message to imply that there might be a different audio signal coming out of the radio when the internal rtty decoder is on vs off. I reread Don's review and did not see this indicated
George, Do you have the Pro III and Writelog set to the same Address? I had to set my Pro II to the address for a Pro I in order for Writelog to select it. I see in Version 10.55D that there is no Pr
Janez, Find your writelog.ini file - in the ..\windows\... directory. Open it in Notepad. Look for a section labeled [Ports] If there is no such section, you can create one. Then place the command "C
Bill, There is a section [KeyboardShortcuts] in the Writelog.ini. There may be two lines there for "keypad1" and "keypad7". My notes say to remove these two lines to get normal behavior for these key
Writelog users, I am going thru the namedmul.ini file used for multipliers in Writelog to put the groups in alpha order per observation by Jim, AD1C. There are some states in almost each contest that
Good Morning all, Is anybody using a LabJack USB Measurement Interface for an antenna controller under Writelog? I use one nicely with Nova for Windows to control my Yaesu 5400 rotor on my Oscar ante
All, A new version of the namedmul.ini file is available for downloading on the Writelog web site at - http://www.writelog.com/downloads.htm or on the RTTY contesting web site at - http://www.rttycon
Eric, I have been making more use of the shortcut keys and see a few more to try next contest. Neat But let me answer the 2nd question. Holding down the shift key, left click on the button you want t
Jim, I have suddenly started seeing this after I updated to 10.57H last week. I only see it when I open the second copy of MMTTY from a rttyrite window. I have checked the real userpara.ini and it se
Any who had this problem. As I could not see how to apply Wayne's instructions to my setup, I simply un-installed MMTTYPlugin for Writelog via the Windows Control Panel. And then re-installed it. All
MMTTY Plug-in users, If you run two instances of MMTTY this might be of interest: In my SO2R set-up, I have used the MMTTY plug-in for years (and I guess I am using the full version rather than the e
Ted, I think the consensus we have reached is that alternating cq does not work in rtty. In fact, my experience is that it will not even Auto Restart after the focus leaves that window (to the other
Charlie, Actually, it almost works that way. There is a gotcha in there for RTTY. As long as you TYPE in the Call Sign which leaves the cursor in the Call field, Enter Sends... the report message as
Jerry, Two questions - If you are trying to run two radios (IC-751 and Elecraft K2) why do you have Number of Radios set to 1? Second, I do not recall that my old IC-751 had a very big command set. I