Sometimes this happens, here is something you can try, it has worked for me! Using NotePad edit C:\Windows\writelog.ini, or whereever you INI file is located, as follows: In the file, go to the secti
Hi Guys, I am trying to help out a friend and I am stuck. He is using Writelog and all had been working. Now here is the problem. He uses the WriteLog CW Receiver mode for CW. It receives CW fine, bu
I have a Flex-3000 which uses the TS-2000 Rig Control commands. My problem is when I worked some station split and send the spot to the telnet, only the VFO A freq shows and not VFO B. So it send DX
I installed the new Writelog update and at first all worked well. Tonight when I started it up, I decided to change modes. When I went to the RTTYRite pulldown, nothing was there (empty) and I could
Thanks Steve, I removed the Rttyrite entries from the Writelog.ini and all is well now But when I clicked on XMMT.ocx nothing happened? But when I clicked on MMTTY, it asked me for the location of MM
Hi guys, sorry to be such a pain but I am still having a bit of trouble getting 2Tone to work. Thanks to Don, AA5AU, and others I got the XMMT.OCX all working in the menu. But this is where I got in
I had the same type of problems as you Bob. I also had the problem of MMTTY outputting the macro's at a high speed and then I had to listen to the outgoing tones to find out when the macro ending. In
I had the same problem installing Writelog on my XYL PC for Fieldday last week. I found if I went into the Writelog Setup from the Entry window and changed something, then did a 'save configuration'
Hi guys, I am a longtime Writelog user but things change over time. I replaced my Icom IC-756PROIII with a FLEX-3000 about a year ago. Everything is work well. But one thing seems to not work. I use
HI Guys, I am sorry I sent the note to the reflector. I found that I read the shortcut key in the Writelog.ini wrong. The WriteLog.INI file has the following two items: NUMPAD1=EntryGotoNextMultDown
Telnet was turned off in Windows 7. To turn it on do the following: 1. Go to Control Panel 2. Locate and click on "Uninstall or change a program." 3. On the Left side of the Uninstall or change a
The trick is to set the Writelog CW Receiver to the CW off-set that you like to hear. I think the default is 600 HZ but I prefer 750 HZ. You have to make an entry in the Writelog.ini file like below
I think that maybe the problem is you need to take off the stop bit but leave the comma, [RIGS] Com6:=19200,n,8,1 <== remove the "1" but leave the comma, sometimes that works when using a USB=>Seria
"I changed the baud rate to 9600 but again that did not correct the situation either. I verified in the INI file this change was actually made, restarted the software as well as rebooted the rig." I
I don't use the CW decoder in WL, but I turn it on and worked fine. But I am using Windows7. Missed you at Dayton. Joe K0BX -- Honor Roll RTTY 5BWAS Stop the insanity! Please do not add me to any dis
Well I don't know how many messages you need. CQ, callsign 59, qrz? I used F keys 1 to 6 for RTTY, F7 & F8 for CW. I don't use the voice keyer but F9 to F12 is available. Seems to work for me. Joe K0
Hi guys I have been a WL user for many years. I consider myself an expert, but this got me baffle. I use the Template for DXpeditions for my day to day logging. Everything has been working fine until
I found that if I right click on a spot, that a little menu comes up and ask me to "Show packet options". Once I did that, the TOOLBAR came back. That is a new one on me. Thanks Joe K0BX -- Honor Rol
Looking at the new additions to WL, I see "Add SendCustomRigCommand to automation interface"? I did a search of the help file but did not find anything. Where should I look? Joe K0BX -- Honor Roll RT
I am getting ready for the contest this weekend and found something a bit strange. In my Writelog.ini file, under [configuration] I have: SendCallExchangeKey=3 QrzFunctionKey=4 This has been working