I thought WL, V10.55, would allow only one radio to transmit at a time when using two radios and a single computer. This was seen while trying SO2R for the first time on RTTY using MMTTY as the WL RT
Hello, Do we need Cabrillo? The rules don't ask for it: "Use separate log sheet for each band. Include a summary sheet showing the scoring and other essential information." http://www.crk.cz/ENG/DXCO
Had a problem with PTT dropping out every now and then. Obviously, noticed it most while CQing. V10.55D is used but believe the problem has been around for a couple of prior versions. Using homemade
Hello Jim, Just being able to map "Insert" to a hotkey would be a plus as you wouldn't have to take your hand off the home keys. As it turns out you can map a lot of WL functions to hotkeys except fo
Hello, Tried to get the dlportio.zip file from the http://www.albany.net/~bg/WriteLog/WLKeying.htm site by clicking on the "here" in the "Download dlportio.zip <http://pages.cthome.net/n1mm/dlportio.
Hello, Thanks to several folks, I've gotten the DLPORTIO files. Unfortunately, still no joy on getting WL to recognize the LPT. I've gone through the WL Archives, but couldn't find anything that solv
Hello, Some how got WL to activate LPT1. However, the Radio1/2 signal doesn't seem to be sent to LPT1 or LPT1 isn't transmitting it to the DB25 parallel connector. Using XP and V10.59. The SO2R devic
Hello, Some how got WL to activate LPT1. However, the Radio1/2 signal doesn't seem to be sent to LPT1 or LPT1 isn't transmitting it to the DB25 parallel connector. Using XP and V10.59. The SO2R devic
Hello, Will WL support a LPT with Resource Setting in the BCD0-BCD7? The reason for the question is that I've been trying to get a PCI board with a parallel port in a new Dell (no LPT on the motherbo
Hello, Has anyone been able to get a computer having a motherboard that has only USB and PCI ports (no LPT), XP operating system and have it set-up to work SO2R with WL? I've been trying to get a PCI
Hello, Having trouble getting two sound cards to work in a computer for a SO2R set-up. Keep getting the Error Message "Can't open sound card (1)". Looked at the WL archives, however, the fixes for du
Hello, Got an error trying to install the: "ANARTS_Cabrillo_Fix.exe - Unable To Locate Component The application has failed to start because DXPREF32.dll was not found. Re-installing the application
Hello Don, Putting the ANARTS_Cabrillo_Fix.exe file in the location where the WL Program is located worked. Thanks. And thanks for the points in the Contest. 73, Mike, K4GMH _________________________
Hello, Can WL recognize LPT Port Addresses other than 378h or 278h? New computer, XP OS, only has USB ports and no LPT. Installed PCI to LPT board which is recognized by the computer as having the "R
Hello Jerry, Have the same problem here with 10.59D. A "namedmul.ini" file is in the same folder as WL.exe. The "namedmul.ini" does have the NAQP listed. Also, checked the "Parameter setup". Had to d
You may want to look at some of the free PCB generating programs. They usually include a schematic drawing program. Express schematic/pcb is one program. 73, Mike, K4GMH _____________________________
Restart Writelog. That helps solve problems like yours Alessandro. Good luck in the WAE. 73, Mike, K4GMH _______________________________________________ WriteLog mailing list WriteLog@contesting.com
During SS SSB as a M/S, we had a couple of problems with V 10.61E. First, the wave files would have a delay at the beginning and the end even though the messages in the wave files had been edited, us
Hello Jerry, What I sent in was a summary report (Contest>Create Summary Sheet...") modified to indicate I was Single Operator 2 Radio. The log submitted was made from the Export>File version of prin
Same thing happened to me about two years ago. Had to get another registration code from Ron, K5JA. Good luck with the installation. 73, Mike, K4GMH _______________________________________________ Wr