Same problem here. I finally just logged him with whatever WL would accept and then edited the name to R2D2. Strngely enough, worked him on another band, WL filled in the blanks and no trouble. 73 Ed
This in the "for what it's worth" category. A few days ago, I had to take a new machine using XP home back to the dealer for service. ( CPU was bad ) While there, I mentioned I had been trying to do
I clearly stated it was "FWIW". Paragraph 1 of Jim's and the subject are clearly in conflict. 73 Ed _______________________________________________ WriteLog mailing list WriteLog@contesting.com http:
http://www.cbsnews.com/stories/2004/09/03/tech/main640812.shtml And it also is unfortunate that 2 many hams think themselves superior to the manufacturer. The above "site" is from Microsoft. 73 Ed __
Well, my system may not be the best in the world, but I have my C drive partitioned into C and D, and a seperate HD serves as E. Although WL has never failed me, even in recovering QSOs when a proble
Jack West wrote: 2. I am runnning the MTTY engine in FSK and all works as advertised except.... The blue text in the Rttyrite window that is echoed form my transmissions is not all there. The upper h
-- This will work when keying a rig on FSK. However, I believe some earlier discussion on either this or the RTTY reflector recommended an inline resister of about 1000 ohms. The keying circuits sho
With 10.45, it doesn't matter if the cursor is in the rst field. Clicking on the age will automatically move the cursor and enter the data. 73 Ed _______________________________________________ Write
-- First of all, unless you did a registry edit and got rid of the WL entries ( and there are probably a least 100 left over ) you didn't clean our machine. Not WLs fault, just the uninstaller. This
All that is required is to run it, click on "Find", then type "Writelog" into the box, press F3 and let it go. When it finds the entry, hit DEL and then Enter, then hit the F3 key again. As for "ran
Using 1048.F and 98 SE. Score is only 1/2 of what it should be. Ran "recalculate score" and no help. Apparently, it is awarding only 1 point for each Q. Any help? BTW, nice to work so many of you guy
Am using 10.48 (98 SE ) here with a serial port which keys the Omni VI. During the SS, I thought I could distinguish many stations which obviously were using PC generated code, but seemed to be of lo
Yep, on all links. Someone needs to take Ron's beer away. Ed _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.contesting.com/mailman/listinfo
Since so many seem to be having problems with the LPT port on CW, I believe the assessment made that it is not a problem with WL, but rather a unique setup is probably accurate. As such, I would thin
Well, TenTec built, for reasons I can't even imagine, the Omni so it transmits "upside down" on FSK. The most simple way to change it to where it works properly is to use the usual transtor keying in
On the URL listed, there is a common misconception. Rebooting a computer does NOT clear its memory. For that, you have to shut down the computer, and remove power from the mother board for about 15
-- Although I guess it's OK, why create a folder called writelog? And the path given is missing a little bit.... missing the "\" after c: should be: C:\Writelog\Wavefile\msg11.wav And of course, the
FWIW, I was merely commenting on the URL. And I would rather use a 'buggy" Writelog than any other program. It's the best by far!! 73 Ed _______________________________________________ WriteLog maili
I believe this is a legitimate complaint, especially since the "kickback" always seems to be in the header lines, for example CW-ALL-LP-MIXED will get you kicked. And the last one I got kicked back
This is of course a wild guess, but I would suspect: (1) the computer power supply; (2) CPU over heating, or (3) a faulty memory stick. I had #3 a long time ago, and it took 2 days of a memory utilit