And every single one of them is in the new database. Please understand that this new one is made up from logs from late 2002 through now. That weeded out a lot of inactive calls, including some DXped
OK, here's the solution to this problem. ALL of the calls in the master.cal file are from logs dated no earlier than September of 2002. If your call doesn't appear, it's simply because you were not i
Guys, I screwed up. When I generate a new master.cal file, if any call has a "/" in it, I generate a call without the "/". For example, if FS/K4SB was the sole entry in the file, the program will gen
I've a bit of trouble here. My soundcard output is almost enough to drive an Alpha, so I built up the interface for FSK. Uses Comm 2 for both keying and FSK through the phono plug on the back of the
Guys, thanks a million. John, WA9ALS and W7DPW provided the answers. AA0K suggested turning the OMNI VI upside down. That worked OK, but then the RX was reversed. You guys are a hoot! Ed ____________
I am again requesting log files for the master files. The cabrillo file is preferred, although I can use the .all also. Please send directly to me. 73 Ed _____________________________________________
Well, my first thought is I can generate a database which has every conceivable call in the world in it. Of course, it would be useless because of the size. And by adding in every log for the last 3
As of a few minutes ago, I asked AA5AU to remove the master.cal and friend.ini files I have sent him from his web site. Whether he does so of course is up to him. In any event, updates to those files
Well, I would try contacting W6OTC. 73 Ed _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.contesting.com/mailman/listinfo/writelog WriteLog
Gentlemen, I am continuing to receive logs for conversion to Writelog and other programs for use as master files for the super check partial and friend files. I, almost a month ago requested that Don
Well, it might be a challenge to run both at the same time, but the Telnet/Packet program written by VE7CC does even more than that. You can filter bands, modes, locations, and so much more. On a dua
If any of you guys are using an OMNI VI with FSK keying, and MMTTY for receive, how about giving me a reply directly. 73 Ed _______________________________________________ WriteLog mailing list Write
Don't forget the CwOnPin1=1 in the writelog ini file. (My syntax may not be correct) 73 Ed _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.
Whoops, Com 1 and 3 use the same IRQ. Check your Device Manager in Control Panel and see if it finds a conflict. 73 Ed _______________________________________________ WriteLog mailing list WriteLog@c
Actually, his call is now K7KAR. Don't know about the web page but you might check both. 73 Ed _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lis
Reason is that any NL4AU/4 is a valid Alaska call. You must insert a K or W before the 4 and it will then score OK. Then NL4AU/W4 will score in the little States to the South. As a matter of fact, he
Blah blah blah And Marty, NW0L replied -- I'm probably the last person in the world to understand this, but why would a person with his own .com address complain about excessive spam? If I understan
-- I may be mistaken as I usually use the AR Cluster commands, but shouldn't the numbers be removed from the 2 lines Dave quotes. I suspect KH7X will be on, and there are all sorts of KLs, KHs, and K
I picked up one of these locally a couple of days ago, and installed it. ( after first trying to ram it into a PCI slot ) Win98SE picked up the new monitor and card, but both monitors are displaying
Guys, the response to my request has been overwhelming. Will give it a try and thanks to all. 73 Ed _______________________________________________ WriteLog mailing list WriteLog@contesting.com http: