Fellows, again many thanks for all your tips. The G-450 is up and running and working like a charm. Only thing is, I'm afraid to shut off the computer now. A couple messages asked for a summary. The
-- Chris, have you tried another telnet cluster? When I close telnet in WL, I always get a "Winsock closed or terminated" messages as the program terminates. 73 Ed ___________________________________
This one is not terribly important, but has my curiosity aroused. In both the CW and SSB SS, I filled in the little box which appears as you create a Cabrillo log, including my section as GA. In both
Well, I currently use a Matrox G-450 and it works fine. However, my hamshack computer uses a PIII and I bought a couple of "junkers" which had good PIIIs in them. Decided the other day to get rid of
-- And to set the configurations correctly just go to display in control panel, and move the #2 monitor either to the left or right of the main. Also, you may on occasion find that the second monitor
-- What would be the effect if the DVI port were connected to a regular monitor? Or is that possible? 73 Ed _______________________________________________ WriteLog mailing list WriteLog@contesting.c
Same here, also with another TO9 and T40WW. 73 Ed _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.contesting.com/mailman/listinfo/writelog W
-- Somehow, I think from Jim's description that the signals were not "long delay echos", but rather different path's, based on the delay described. I've only heard a lda twice in my ham life, and be
-- Well I did, but must have messed up somehow. Downloaded it again this morning, ran the conversion program, opened the CQWW log, and somehow WL filled in the blanks from those 2 TO calls. Now I kno
Well, I hope this doesn't put be wearing a dunce cap in the corner, but I would like to shorten the cables from my 2 monitors. They're about 6' long, and I only need less than 2 feet from the most di
-- That link works, but the subject line bothers me. Ed _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.contesting.com/mailman/listinfo/writ
-- You cannot use LPT keying to the FSK jack with an Omni because of the reasons Dick mentioned.. And since the OMNI has its own TTL circuits, you cannot use the regular NPN circuit to the FSK jack,
I think the best thing we could do with the HOME, END and other keys is to program them to play "Wake up Stupid.WAV! when they are pressed. Ed _______________________________________________ WriteLog
-- I'm not that competent with WL, but the method I use is to make the ini, save it and then copy it to another directory, rename it ( such as WLCW.ini ) and the next time I want to use it just copy
-- I don't answer "last two". This is a liddish op proceedure from Nets. There has got to be at least 10,000 things ahead of this one in priority. 73 Ed ______________________________________________
Make sure you have an actual message in the buffer. If you don't, you'll get the above. 73 Ed _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://list
-- That is too close to something W9OL might say, and may indicate an infection. Paul has been reading entirely too many emails from Firebrick. You guys out there help him before it's too late. Ed _
-- That CT compatible line is not correct, unless you just abbreviated it. 73 Ed _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.contesting
-- Missing in 10.38 also 73 Ed _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.contesting.com/mailman/listinfo/writelog WriteLog on the web:
-- Another reason may be the fact that using the control panel to remove a program rarely clears either all files, directories or the windows registry entries. Next time you decide to uninstall WL, d