Gentlemen--I am a brand new WL user, and have a problem with an add on PCI card for com ports. My TS850's talk to WL via the built in com 1 on the computer, with two radios and two different cables.
Mike I am using the typical homemade cable, with the series resistor and diode clamp in the data out line. I downloaded a new driver from the internet, and now I have one of the add on ports working.
Using the W5XD MultiKeyer to drive the PTT lines on two Kenwood 850's. This is a new unit, and the first time it has been used. Both radios do not operate properly when the PTT is asserted. The "On A
I've found that I have to check Echo Microphone under "Tools"-"Sound Board Options", every time I start WL. Is there a way to have Echo Mic enabled whenever WL starts? Dennis K5YA ___________________
Randy-A month or so ago, I posted a complaint that the W5XD keyer would not activate my TS-850 PTT lines. I received several private emails from other TS-850 users that they had the same problem. I b
My XD Keyer is about 2 months old. It has the PS2501-2 opto isolator in the PTT circuits. The opto diode series resistor is 1.2K in the Keyer. I paralled a 330 ohm with the existing 1.2K's, and the P
I'm using a W5XD keyer for my headphone connection. Radios are TS-850's. My recorded messages from the soundcard are getting into the headphone path somehow. The sound is very muffled, and hard to un
I operate in the "Enter Sends exch/QRZ" mode. When I get tired and in a hurry, I don't always get the exchange info entered correctly. I found that if there is a problem with the information in the e
All OK now--The solution was simple, but I still haven't figured out what kind of ground problem I have. The tip off, as some suggested, was the low level hum in the audio. The cure for hum in the au
Recently there has been another series of emails, asking for Run mode, and a separate S&P mode to be included in Writelog. Wayne, there are many CW contesters waiting for you to add this feature, so
Here are a couple of tips for adding some shortcuts to WL, using a Keyboard Macro program such as "Macro Express". I use a keyboard purchased from Comp USA, for around $20. It has a Mouse Wheel in th
1. After a call is entered, and the exchange is sent using "enter", the cursor needs to move to the next field that an entry will be made in, without using the space bar. Thanks to K0CF for pointing
Is there anyone out there who has tried using this function? The following steps are how I used the alternating CQ function in the SS. I would appreciate any suggestions on what I might do to simplif
My FT-1000MP is reversed by the MK-1000 also. I had to make a "tip/ring reversing" adaptor to correct the audio connections. Dennis-K5YA _______________________________________________ WriteLog maili
I use WL in the DXpedition mode for general logging. KG4 is in the log several times on 160M, but is not counted as a multiplier, giving me one less mult than actually logged on 160. If I go to Conte
I use the "ENTER sends xchg/QRZ mode. When calling CQ in the BARTG, and I click on a call in the RTTY window, the call is entered in the call window as it should be, but the cursor advances to the RS
I tried using the INSERT key to grab the highlighted call, and it won't work for me. Is there an .ini file entry that needs to be made? Since I use "Enter sends xchg/QRZ" mode, I found that I had to
I have opened a new log for the CQWW. When I try to type in a call, and I get to the second character, I get a Window that says "Writelog mfc application has encountered a problem and needs to close"
Fixed by re-installing Writelog. Thanks, Dennis _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.contesting.com/mailman/listinfo/writelog Wri
Anyone have an XD Multi-Keyer for sale? Dennis-K5YA _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.contesting.com/mailman/listinfo/writelog