Author: "Alfred J. Frugoli (KE1FO)" <ke1fo@arrl.net>
Date: Fri, 5 Nov 2004 22:34:14 -0500
Hello fellow Writeloggers, I'm running 10.47E and having a problem with cut numbers on leading zeros in serial numbers. I've searched the usual suspected sites for answers and all I find is reference
Author: "Alfred J. Frugoli (KE1FO)" <ke1fo@arrl.net>
Date: Wed, 24 Nov 2004 21:37:28 -0500
Using 10.50D on WinXP Home SP1 I have the "follow me" option checked on the packet spot window. When I change bands on the active radio, the spots follow me. If I switch to the 2nd entry window and t
Author: "Alfred J. Frugoli (KE1FO)" <ke1fo@arrl.net>
Date: Wed, 24 Nov 2004 22:40:25 -0500
What I've found is that the packet window doesn't show up in the "start bar" until the telnet connection window is either cancelled or "OK" is clicked. So, if you're connecting via telnet, when the p
I was looking for info on Dueling CQ's this weekend during SSCW. Is this still an available feature in Writelog? I'm running 10.63H. Thanks. 73 de Al, KE1FO __________________________________________
During this weekends NAQP, I noticed that both rigs could TX at the same time. Thanks to K4GMH I now know there is a menu option for RTTY that prevents this (why only RTTY I'm not sure, CW and SSB se
I'm using WriteLog in it's most "standard" setup with the WriteLog packet interface connecting directly to a telnet dxspider node. I only see 2 spots on my run frequency, the last 2 worked (at least
If WriteLog is to support SO2R operations well, I think this upgrade needs to happen. I have a very small station, but by the upcoming contest season, I'll have two rotateable yagis. Small, low - yes
To be completely honest, WriteLog's lack of development is exactly what has kept me with the program. I don't contest that often (4-6 times each year seriously, maybe 10-12 times total). Every time y
Bill, In response to: 1 - IMHO all Amateur Radio software/hardware interfacing is complex. These are not WriteLog issues, but rather have been caused by lack of support for legacy devices in newer co
You didn't give much detail in your e-mail, but I would guess from your description that you're doing the following: Selecting CW/RTTY/SSB messages... from the Setup menu Clicking the Browse button P
Hey guys, Final setup before CQWW RTTY starts tonight and somethings not working right with writelog2getscores. I'm using Writelog 10.63H and writelog2getscores 1.0.6. As of the end of last contest s
Gerry, So here's my situation. WriteLog.Document:protocol:stdFileEditing:server has a path of C:\Program Files\WriteLog\Programs\writel32.exe. All other entries such as Writelog.Document:DefaultIcon
Hello everyone, Operating WW RTTY using AFSK packet assistance this weekend was very frustrating. I'm using TS-940's so don't have a menu to correct the frequency display and/or data sent to the comp
And another one I find handy (from http://k9jy.com/writelog/writelogini/band-map/) AutoFillFromBandmapHz=n If you tune closer than AutoFillFromBandmapHz to a bandmap station, the Entry window will be
Hello everyone, When I make a packet spot using Alt-F3 the cursor does not return to the call field of the entry area afterwards. I'm using 10.63H (I haven't renewed my license in a while, so can't u
Hello everyone, When I make a packet spot using Alt-F3 the cursor does not return to the call field of the entry area afterwards. I'm using 10.63H (I haven't renewed my license in a while, so can't u
Hi everyone, Both Alt-F3 and Control-T cause the cursor not to return to the call field after making the packet spot. Any other ideas as to what to check. Thanks. 73 de Al, KE1FO -- Visit my amateur
Steve, I'd use this in an SSB test, or in a situation where I wanted to periodically send someone's name manually. For instance, I used to live out in the SCV area of CA, and when I work some of the
If Wayne implemented it, we could - as long as you recorded every name in the friend.ini file as a .wav file. 73 de Al, KE1FO -- Visit my amateur radio contesting blog at ke1fo.wordpress.com. _______
If I remember right, wl simply ignores the macro for any call that have no entry in the friend.ini file, so you could do what you recommend now, just create your own friend.ini file. It would work on