Put a callsign in the Entry window then click Antenna to Azimuth and it should turn to a direction based on the callsign. For the idiom press you need to set the rotor type to DCU=1. If you look on m
I see a similar behavior on the Omni VI+ with a serial interface. I always thought it was a timing issue between clicking on the bandmap and polling the rig frequency info. Keith Regli (K7KAR) mailto
WL won't do it, but if you export (to ADIF) a contest file that includes state info, something that I've just been playing around with will give you a band/mode breakdown of number of states. It's in
I released a new version of FKeys with a few new features. I mostly consider this a mature tool and don't plan future releases. When someone has a suggestion I'll look at it and see if I can figure o
Jim, It's generally best to use the serial port to generate FSK rather than the USB adapter. The timing issues in the USB adaptors cause some problems and, in most cases, the drivers don't support th
It's www.kregli.com - Charles Regli from CMU beat me to the punch. Keith Regli (K7KAR) mailto:keith@kregli.com http://www.kregli.com --Original Message-- From: writelog-bounces@contesting.com [mailto
Wayne, Writelog will do all the main contests with Rttyrite just fine. For some of the smaller contests there are some contest modules available on the Writelog download page. I suggest sticking with
I haven't tried RFW with the last several versions of WL. Does the window come up at all? If so does the title read "Writelog not found" or "Rotor for WriteLog". It could be that they've changed the
Phil, I am still out here. I haven't touched (or looked at) the code in 7 or 8 years, so it would be a challenge to make any changes. I have used it on both Win 7 and 8.1 and with the current version
probably %E at the end of the macro? Not needed for CW, but RTTY must know your done. -- Keith Regli mailto://keith@kregli.com http://www.kregli.com _______________________________________________ Wr
Hi Steve, There isn't any delay built into FKeys for most things. A couple of the complex macros require a few milliseconds, but the vanilla stuff like "Press F3" just insert the equivalent of the ke
Hey Steve, Do you turn off downloading updates by Microsoft, Anti-virus and others during a contest? That can suck the life out of a machine at the most inopportune times. Also background scans by an
Hey Joe, I tried it a little with my 6500 this morning. So far not much luck with the new driver. I don't think you'll have to uninstall/reinstall stuff to switch as the comm happens on the Ethernet
It looks like the revamping of Writelog broke some functions in my FKeys utility. I suspect in reorganizing Writelog one or more of the (internal) window names changed. Tracking these is how FKeys fi
I've finally gotten back to my home and the ability to update my FKeys utility to support Writelog V12. I appreciate your patience with my travels. I'm looking for some folks to try out the new versi
After solving a couple of additional problems, the FKeys utility is ready for general use. For those new to Writelog in the last ten years (last time I did an update), this utility is used in conjunc
I did a quick comparison of the command set for the 7300 and 7410 and they appear to be the same. The default CI-V addresses are 94h and 80h respectively, but can be adjusted. -- Keith Regli mailto:/
For those who use my little FKeys utility with WriteLog. I just noticed something that has stopped working. The "Clear QSO" function no longer works via FKeys in WriteLog 12.27C. It looks like this m
If I recall correctly it has something to do with screen resolutions. I think the easy way to fix it is to delete the xstart and ystart entries under [Locations] in the FKeys.ini file. If that doesn'
After some checking this happens when you move your FKeys setup from one computer to another, or just rearrange directories. FKeys appears looking kind of like a flagpole and you can't do anything wi