Set the K3 PTT-KEY menu item to OFF-OFF or make the necessary changes to both N1MM Logger/WriteLog to prevent them from asserting the RTS (and DTR) lines when the programs initialize. The two program
One note concerning the microHAM micro2R ... it *does not* contain a sound card and does not change the nature of Windows 7's handling of sound cards. What micro2R does is combine both channels of w
Paul, See the configuration example for WriteLog (USB) and MK2R+ available in Router (Help | Download Documents) or on-line at www.microHAM-USA.com/support.html. If you're not displaying one of the f
Please see the example configuration for WiteLog and Digikeyer II (not Digikeyer) available in Router via "Help | Download Documents" or online at www.microHAM-USA.com/Support.html (select Digikeyer
See the example configuration for Writelog and Digikeyer II available via "Help | Download Documents" in microHAM Router or online from the Digikeyer II area at www.microHAM-USA.com/Support.html. 73
Gerd, Have you created an override for the IC-706mkIIG CI-V address in WriteLog? The CI-V address used when you select IC-706 is that of the *original* IC-706 (48h) - not the 706mkII (4E) of the 706m
Use "Sound board Mixer Control" to set the sound card inputs/outputs before starting Writelog. The message is from Writelog and means that the Windows devices for microphone/line input and soundcard
The message that refers to setting up soundboard "Vista style" is simply a matter of a conflict between your Writelog Soundboard configuration and the Windows Sounds configuration. In most cases it i
Steve, Disable "Echo Microphone" in Sound card options and save the configuration. USB Voice CODEC (the mic input) is *mono only* while the "Recording loop" uses USB Audio CODEC which is *STEREO.* I
The current version of Writelog is 11.06. 10.90 was released in October 2011. If you have not renewed support in the past 12 months, it is probably time to do so. 73, ... Joe, W4TV __________________
Signalink is *nothing more than a sound card* - it does not provide a radio control serial port or a Winkey keyer or PTT under control of the software. 73, ... Joe, W4TV _____________________________
The Signalink PTT is a *VOX* it is not controlled by the logger. There is no *serial port* or *USB Port* in Signalink for any logger to use for PTT. 73, ... Joe, W4TV ________________________________
What operating system? You should probably disable the recording loop if you are going to use the decoder. I don't know if it's possible to run both. In any case, have you configured Writelog to the
I don't believe Writelog tracks QSL_SENT or QSL_RCVD. I do not see those fields in the default General DX Log template. 73, ... Joe, W4TV _______________________________________________ WriteLog mail
The ADIF data from the modified "General DX Tracking" format may still not be acceptable for import to your general purpose logger. Most loggers will not import fields defined as <APP_xxxxxxxxxx: >
See "WriteLog Contest Wizard" on the Programmer Resources Page: http://writelog.com/downloads/programmer-resources 73, ... Joe, W4TV Marshall, AA0FO Sent from my Motorola Smartphone on the Now Networ
What rig? What mode is being logged? Are you using FSK or AFSK? 73, ... Joe, W4TV On 9/28/2012 10:16 PM, Tom Shelton wrote: I'll start with a mea culpa - I probably will kick myself when this e-mail
Is FSK mode being logged? Does the "Radio" button say "xxxxx khz FSK"? Are you using LSB or USB with AFSK? Re you using "CQ World Wide RTTY Contest" (the correct mode)? 73, ... Joe, W4TV On 9/28/201
when I switch to the right radio (2) when I hit an F key to send anything the Tx port in that MMTTY switches to sound (should be Com-txd, and it was that before hitting the F key. Of course this resu
Don't use EXTFSK with Writelog. Select the FSK port and choose one of the "Software generated FSK" options in RTTYrite's Ports menu (depending on whether you use TxD or DTR for FSK). 73, ... Joe, W4T