Jeff, I'm merely suggesting the information is already present in the WriteLog Manual [Help File] for those that care to look. For example, the [Elecraft_K3_COMMANDS] section shows how to program the
You will need to find a way - either through the mouse driver for your keyboard/mouse or a key mapper - to map the Scroll Up and Scroll Down events to keystrokes to activate the commands. However, un
These two sound cards are reported to work properly with Windows 7, 8 and 8.1 and provide the necessary mic/line switching: http://www.newegg.com/Product/Product.aspx?Item=N82E16829126101 http://www.
Here's an applications note I wrote on USB interfaces. The Tascam US100 is my primary sound card. I use the Numark on a second laptop for the second radio with SO2R RTTY. The Tascam is a better choic
http://www.bhphotovideo.com/c/product/639303-REG/Numark_STEREO%7CIO_Stereo_iO_USB.html Which also says "not available" http://www.bhphotovideo.com/c/product/915632-REG/tascam_us_322_usb_audio_midi_i
microHAM micro2R also provides all the necessary mic switching (and muting) for SO2R phone operation. It is also preferable to use separate (USB) sound cards for digital operation - since that permi
MAPISendMail failed: 2 appears to be a privilege issue in Vista, Windows 7 and later. See this link: <https://social.msdn.microsoft.com/Forums/silverlight/en-US/63e9f5b2-f5f2-4cf8-bdc2-ca1fad88ebe5/p
2Tone has traditionally not held the serial port open when it is not transmitting. I do not have either TinyFSK or the K8UT code but it would seem to me that one could configure both instances of 2To
However, I am concerned about the possibility of Windows 10 coming in two versions - 64 bit and 32 bit. I would hope to be able to go to the 64 bit system, but am concerned that WL might not run on W
I always run FSK as this allows me to use the Twin Pass filters built into the 7600. As you have indicated it may not be possible to use Gritty in a contest unless it were connected to a second recei
Start | All Programs | Writelog V11 folder (Group) -> then run Sound board mixer control. If you have problems understanding what you see, look in the WriteLog help file (Writelog Manual). 73, ... Jo
In order to take advantage of the new features, I suspect Wayne will need to do a completely updated Icom driver for the affected radios. The changes in the IC-7600 also appear in the 7800/7850/7850,
WriteLog users, Here is a pointer to an unsupported utility that has some 2-radio functionality. I admit up front that when I try to run it, it makes me a far worse operator than without it. But ther
Not supported. microKEYER II does not have an RS-232 output. The iLINK port is TTL. Use a standard USB to serial converter if you do not have an open serial port on your computer motherboard. 73, ..
The WriteLog V11 folder in the Windows Start Menu contains an "Edit Writelog.ini" entry that invokes Notepad and automatically opens Writelog.ini in the Virtual Store. The "target" is: C:\WINDOWS\not
If you installed it at some location other than C:\Program Files yourini file will be at C:\Windows. Not necessarily. I have Writelog installed in E:\Ham Programs\Writelog and my ini file is in the v
I doubt it but one can try. It would take a full installer for your current registration key. However, one can create the missing shortcut ... 1) right click on the desktop and select New | Shortcut
Strange since the information in c:\ProgramData\ should show up in ALL accounts on the machine. That's why I passed along that suggestion rather than using %AppData%\Microsoft\Windows\Start Menu\Prog
Follow the example configuration for Writelog and MK II available in Router (Help | Download Documents) or on-line in the MK II area at www.microHAM-USA.com/support.html. The most likely issue is tha
For setting output audio, use the Windows Volume Mixer (includes embedded level meters for output and each source [application]). For setting input levels, use the meters in the Windows Sound Control