Do your logs have the correct time? Does your DX cluster have the time of day? I now have a stratum 2 NTP time server at timelord.w1nr.net that is open to the Ham Radio community. Under Windows XP, e
The Sweeps only cluster was quite popular last weekend so I have set up the filters at usdx.w1nr.net for CQWW CW. Only spots originating in zones 1-9 and for stations on the CW portions of the contes
Dick, Double click on the prefix field which brings up the editor window. Enter 4U1U as the prefix. Then a recalculate score will take care of them. Mike, W1NR _______________________________________
Check the frequency logged to see if it is "out of band". Check the time to see if it is way off. These are the most likely causes of "bad" contacts. Mike, W1NR Question for the group: I'm working th
And how long have you owned and used WriteLog? There have been three upgrades in 2006 and 7 or 8 in 2005. I don't understand your issue. Mike, W1NR _______________________________________________ Wri
I have used the Belkin F5U103 for CW, PTT and RTTY. For rig control just about any USB->Serial adapter will work well. The "Cables To Go" available from Amazon are very compact and do work well for r
Try turning off "Transceiver Mode" in the comm port settings on the radio. Mike, W1NR _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.contes
My mistake...I was thinking about the IC-7800... Mike, W1NR _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.contesting.com/mailman/listinfo/
If you post to ANY mail reflector with unrestricted access to the archives, your email address WILL be harvested. There is little or nothing anyone can do about it except use of spam filters, RBL's,
This should probably go on the contest reflector as well... First, antenna switching with first come first served lockout. Bandpass filters. Another trick I know some have used is a #47 lamp as a fus
In addition, I was unable to get WriteLog to recognize most of the official 4 character county designators. It appears WriteLog still wants them in the old format. Mike, W1NR My first Cabrillo submis
A lot depends on the laptop and chipset. On both of my dell's I can use the laptop display and a separate monitor. With Windows XP, you need to set up the properties so that each display is separate,
I have 10.61 installed and noticed an annoying issue with point and shoot out of the packet spot window. Many times, more often than not, when I double clicked on a spot, the call would get put on th
A PII 350 may not run XP. It may also have no or problematic USB hardware. Why do you think an upgrade is needed? Mike, W1NR _______________________________________________ WriteLog mailing list Writ
A "locked" directory can sometimes occur if there is corruption in the file descriptors. Bring up a console window and type "chkdsk c: /f", answer "Y" to the prompt to check at boot and reboot. It Mi
I did not go with Windows 2000 for almost a year after release and did not go with XP until 2 years after. My advice is go with XP for the foreseeable future until all the problems get worked out and
You need to do the following in the ports setup: 1. Check button for CW port 2. Select PC Generates 3. Check All mode PTT on CW port RTS 4. Hit CW PTT button and select COMM RTS Wait a minute? COMM R
I have the F5U103 on XP and it works fine doing FSK. They are hard to find. I have borrowed a RocketPort 4 port USB adapter that I will try out over the weekend and let the list know how it goes. Has
I am just getting started using PSK31 and noticed that people sending to me can backspace delete errors in typing. However, the keyboard interface of WriteLog does not allow it. The instructions indi
The old mechanical teleprinters didn't have any way to back up and delete a character, so it was never include in the code. Some of the old tape perforation machines would actually let you backspace