I finally upgraded my ancient v10.36 to 10.43 today. I've been curious ever since seeing that a 2nd VFO Bandmap feature was added in v10.40 I was surprised to find that if I click on a spot in the VF
FWIW, it works on the FT-1000MP in 10.43 and someone else reported it works on the FT-920. Don, IMHO you ain't missing anything. 73, Barry N1EU From: "Don Melcher" <don@hfradio.com> What radios are s
The USB - dual serial port adapter from http://www.usbwholesale.com/us232%202port.htm is working fine with my FT-1000MP under WinXP (used CommSlot3=5 in the Ports section of writelog.ini for COM5 use
I was curious if anyone has come up with an easy way to control the filter selection in each i.f. of the FT-1000MP MarkV / Field from the computer while running Writelog? A couple of years ago someon
FWIW, I had more consistent results with the dlportio driver than with UserPort. I wrote up what worked for me at http://www.qsl.net/n1eu/n1mm/MMKeying.htm 73, Barry N1EU ____________________________
Anyone know why "Bandmap on 2nd VFO" would be grayed out for an FT-1000D? Semed like it was enabled for an FT-1000MP. Huh? Thanks & 73, Barry N1EU ____________________________________________________
Can someone please tell me if there is a shortcut key to swap vfo-a and vfo-b? Not much luck with the inscrutable help file. Thanks & 73, Barry N1EU __________________________________________________
Thanks for the good info Dick. I think I wishfully confused the "Exchange L/R VFOs" in SO2R with an ability to exchange A/B VFOs on a single radio. I don't think this can actually be done from the ke
Opening a "Band Map on 2nd VFO" window with an Orion just opens up a duplicate bandmap of the 1st VFO. Wayne, I'd be happy to test a possible fix if and when you get to this. Thanks & 73, Barry N1EU
Just a heads up that I've found that Comm PTT "yes" works in ssb with the Orion but should be set to "no" for cw or the rig will just key a solid carrier for the duration. As has been discussed on th
Has anyone else using an Orion with Writelog found that the selectivity gets reset to some fixed value every time they click on a spot? In my case, 490hz in cw. Thanks & 73, Barry N1EU ______________
ON4ADZ asked: "Has anyone tried out the new second vfo support of the ft1000xx ? How does it work ? Two bandmaps ? Full use of the two vfo s e.g. rx and tx on vfo B ?" Dirk, Writelog does provide a b
W3DQ asked "How do I print out the shortcut list?" It's a little bit dated by now, but there's a nice shortcut list on my Web site prepared by K3NA: http://www.qsl.net/n1eu/WriteLog/wl_keys.htm 73, B
Two N1MM Logger features that should be added to Writelog weren't even mentioned in the review: 1. Support for SO2V that mimics SO2R - dual entry windows, dual FUNCTIONAL bandmaps, subrx on/off switc
Did anyone else notice problems getting packet spots to feed into WL 10.45 using DXTelnet? The OLE link window opened fine but spots showing up in DXT didn't make it to the WL window for me despite s
Thanks for all the messages (mostly private) suggesting that DXTelnet continues to work fine with 10.45 73, Barry N1EU _________________________________________________________________ Watch high-qua
I posted this about a month ago: "Has anyone else using an Orion with Writelog found that the selectivity gets reset to some fixed value every time they click on a spot?" There's a bug in Writelog's
AJ3M suggested "Please see the following N1EU's website: http://www.albany.net/~bg/WriteLog/WLKeying.htm" Masa, that's actually an outdated link to my old Web site. There is updated info on my newer
No, the 2nd vfo bandmap has always been for display purposes only. I posed the same question last year. FWIW, N1MM Logger does have this function - it treats the 2nd vfo like a 2nd radio. 73, Barry N
I believe it will be quite an undertaking to impart SO2V functionality to WriteLog. The developers of N1MM Logger evidently coded in support for SO2V from the early days - they treated 2nd vfo qso's