Author: A. Sewell N5NA" <n5na@arrl.net (A. Sewell N5NA)
Date: Sun, 26 May 2002 08:57:53 -0500
Rich, I just did a quick check. It appears 10.32E does give points for contacts between class D stations. The bottom of the Writelog download web page shows how to split the zip file between floppies
Author: A. Sewell N5NA" <n5na@arrl.net (A. Sewell N5NA)
Date: Mon, 27 May 2002 01:58:13 -0500
Garry, Try the following: 1. Open up WRITELOG.INI (Start Menu, Run, type in WRITELOG.INI <ENTER>). 2, Find the [PORTS] section and add CW_ON_PIN1=1 line: [PORTS] CW_ON_PIN1=1 73, Alan N5NA -- Origina
Author: A. Sewell N5NA" <n5na@arrl.net (A. Sewell N5NA)
Date: Sat, 13 Apr 2002 09:24:22 -0500
Bruce, I think you need to go to Contest / Exchange Format Setup...., highlight the PR exchange and check the box "Tab Only. No auto-tab to following field when full." 73, Alan N5NA morning second ha
Gary, Writelog doesn't support keying the LPT port with a paddle like NA & CT do. You'll need to use the rig keyer or an external keyer for that. 73, Alan N5NA
I am in full agreement on this one. While I was unable to participate in the RTTY RU this year due to a move I was in it last year and had this exact same problem. There were several times I almost f
Dick, I agree with Scott. I have a Gateway desktop that the keying is fine on the LPT port. However, I have a Gateway notebook that the keying was erratic. I upgraded to version 10.30 and added the r
Perhaps it is a Windows 95 problem. I upgraded to 10.29 on my 350 mhz PII desktop running Windows 98 and it is sending perfect CW via the LPT port. I installed it on my 266 mhz notebook running Windo
Then again, maybe it is not a Windows 95 problem. I upgraded my notebook from Win95 to Win98 and loaded 10.29. I have choppy CW now with Win98 on the notebook. I uninstalled 10.29 and went back to 10
Do you use the serial port with other applications? I use a Thinkpad w/NT at work and when I recieved it the serial port was disabled. There is a Thinkpad utility program to set up the serial ports a
Gary, There is a writeup on the Writelog web site on setting up Userport. It is here: http://www.writelog.com/support/lpt_port_support_on_windows_nt.htm. 73, Alan N5NA to I and ______________________
The TQP is a part of Writelog. It is not an add-in module. If you have the latest version of Writelog you should have the latest TQP. You can see the county abbreviations if you go to Contest menu an
Brian, Have you tried entering CW_ON_PIN1=1 under the [PORTS] section of your writelog.ini file? 73, Alan N5NA again country a sounds fine OK. via the think keying last the it re-installing Standard,
Ian, I bought a USB to Serial Adapter from www.sewelldev.com for $19 a while ago and just tried it out this past weekend. I found it works fine for rig control and also connecting a TNC. I also just
Running Writelog 10.44B and MMTTY 1.65 here and all works fine. Alan N5NA Stuff deleted.......... _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://
Alan, You might try here: http://www.writelog.com/support/lpt_port_support_on_windows_nt.htm 73, Alan N5NA Can _______________________________________________ WriteLog mailing list WriteLog@contestin
Here's my $.02 worth.......... Point #1 - I like CQ & S&P modes. I suggested this a couple of years ago but only got flamed by other users on the reflector. As a TR user, once I learned how to use CQ
Lee, Do you have CW_ON_PIN1=1 in the [Ports] section of your writelog.ini file? That may help the keying. 73, Alan N5NA _______________________________________________ WriteLog mailing list WriteLog@
Oms, Mine works fine on AUTO. 73, Alan N5NA _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.contesting.com/mailman/listinfo/writelog WriteLo