Ditto, I also get: Niestety nie znaleziono dokumentu: /wp/sp7dqr/wl2dx211.zip Cheers, -rick I get a "The page cannot be found" message when trying http://strony.wp.pl/wp/sp7dqr/downloads/wl2dx211.zip
Calm your liver (or "Cahm ya livah" as they would say in New England). ;-) These posts are by invitation of Wayne, the author of WriteLog. He is seeking info on N1MM specifically. Here is a snippet
All of these programs should work fine. UNLESS, they are trying to bypass the XP file system and twiddle bits directly on the disk. If they use the standard OS file system calls for open/close/read/w
Just a couple of comments, although the documentation for any RAID controller should point a lot of this out. 1) RAID stands for Redundant Array of Individual Disks. There are several different types
Yes, you can use IDE. I put a Promise Ultra100 TX2 controller into a server that I built. Also, a friend at working is using a Promise controller on his home system which is hosting a Web site. I don
George, Unles I am mistaken, I believe that the K2 control set was a clone of an existing "standard" such as the ICOM or Kenwood. I would suggest trying one of those two commands sets. Apologies for
This past field day the club used my laptop with WriteLog V10.33C for SSB. The person who is integrating the SSB and CW logs is trying to do so with an earlier version of WriteLog. I do not know how
you're not alone - I had the same experience. -ricK7log I was recently getting my Field Day stuff together and am trying to get Writelog to create a Cabrillo file so I can send it to the ARRL site. I
I am setting up my laptop for Field Day. It is running WinXP-Pro. I don't want the field day account to be in the Administrator group. When I started up WriteLog (10.32E) from this account it complai
I've started to do some of that. Interesting exercise - since there are lots of entries. I may just add the ACL for the user (my club's name) to the whole tree. Thanks, -ricK7log If you can figure ou
The FixADIF package may be of some interest to the WriteLog users. The package contains two programs. ADIFComment.exe is a command line (DOS window) program that will add an ADIF comment field to ver
I believe that you will fine that WinXP-HE does not support dual monitors. WinXP-Pro is supposed to. What is unknown to me at this time is whether or not that support is for "dual-ported card", "dual
Probably should have re-titled this reply to something like "WinXP HE vs. Pro". I re-visited www.microsoft.com/xp looking for the differences. I had see a simple table with check marks for features.
This is a multi-part message in MIME format. --=_NextPart_000_0029_01C193E2.FA2623A0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit What Len is saying is quite true. And
Gerry, Good point. I didn't want to get into the detail of fixed "pools" of memory that could be exhausted much, much more quickly than the general memory space. Thanks for the tip on System Monitor.
WriteLog 10.28C Rig: Yaesu FT-920 Problem: 1) When started up, WriteLog sometimes reads and tracks the rig's freq/mode and sometimes doesn't. 2) Sometimes the program will stop "reading" the rig duri
Think I might have found part of the problem. What it boils down to is this: (1) Using the dial or band switch and WL keeps up (2) Use the rig's number pad to punch in a frequency and WL keeps up. (3
Barry, Good point - thanks! I have been confused by this in the past, but not in relation to WL. -rick Rick, make sure the FT-920 is in "VFO" mode and not "MEM" or "MEM TUNE" (at least that's what th
Thanks for the confirmation. My suspicion is that it will indeed be found out to be some sort of bug in the FT-920 firmware. WL is sitting there fat, dumb and happy when we go hit a button on the FT-
Some comments on Marty Tippin's post - a lot of things were right on. I have seen a lot of these reviews, many of them are aimed at business users. Most of the ones that I have read have concurred wi