If you're a C++ programmer, here's all you need to create your own contest modules for WriteLog. These are the same tools the author uses to create contests for WriteLog. Microsoft Visual C++ Versio
Marty, Catching up on email, so perhaps this has been answered. From my website, under WriteLog.ini: "Option: Auto Save Top of Page If this parameter is not in your WriteLog.ini file, you will get at
Hi Alan, You will need to change your CW from an LPT port to a serial port; that is the only change. LPT keying on NT, 2000, and XP is not available out of the box. There are lots of people on 2000 a
Hi Bruce, You do this with the '+' key that logs the call and sends the QRZ message with the following WriteLog.ini entries as noted on my web site: "Option: Send full call on correction WriteLog, by
Hi Steve, I don't believe WriteLog supports reading the VFO B on a Yaesu FT1000MP. I don't know if it is not part of the radio control interface put out by Yaesu or if it was not implemented in Write
Hi Dick, I've seen 3-4 replies on the reflector on this, but wanted to do a summary for how I use the Multiplier Window vs. the Check Call window to perhaps clarify each use of the window. I only bri
All, Wayne provided a challenge to tell him where the interface with the Yaesu is broken (and I'm not sure it is...). I did some testing tonight and here is what I found: - RX and TX on VFO A. Record
Hi Gary, et. al., A couple of comments on this thread (a good one, by the way): My documentation for networking on the K9JY site is now a year and a half old. Wayne has made some significant improvem
You forgot to mention that you are using DXTelnet! You are receiving the error message when the WriteLog.ini file is not correctly setup to use DXTelnet. Edit Writelog.ini Add following two lines: [O
'R' shows up if you log more than, I think, two contacts on the same frequency in, I think, one minute. You have to pull down the menu to determine if the radio is 'Run' or 'Mult.' See K9JY's WriteLo
"the letter ?N? optionally followed by a digit n the serial number is sent, padded with leading zeros if necessary to get to n digits. If the mode is CW, the digits are translated to letters accordi
Hi Dave, You can find the links and what to do with the downloaded files off my website. Select 'Master Files' from the left navigation bar. CU...Scot, K9JY See K9JY's WriteLog User Support Site at:
Hi Joe, This was a bug in an earlier version of WriteLog where editing the callsign caused a fault. It's been fixed, but you need to download the latest version announced just a few days ago. CU...Sc
I think this was on the reflector before; it has to do with PaQSO party doing .5 points for things.... CU...Scot, K9JY See K9JY's WriteLog User Support Site at: http://www.k9jy.com mailto:scot@k9jy.c
Hi Don, What you are describing here points to an incorrect setup with the sound card in WriteLog. Somewhere, something changed. The section most likely incorrect is the 'Receive Selection' on the fa
I tried this on 10.36G with Alt-F3 to K4JA and it worked absolutely fine. He uses ARC-Cluster. Can someone give me a telnet address (including the port) and I'll try it... Thanks...Scot, K9JY See K9J
Hi Barry, et. al., A personal view in that I don't think I would want it to clear the RIT unless I pressed it on the keyboard. Many times I have left the RIT on a bit off the transmitting frequency s
Hi Jerry, I just sat down and tested 10.35E with both RTTY and the current WAE SSB Contest. All the buffers cleared just fine when the escape key was hit. No follow-through of the message when the ne
Hi Pat, What you've described so far looks like WL is doing what it is supposed to do. The volume control moving totally over to the one side, for example, is exactly what is supposed to happen when
Hi Simo, Back from business trip and the answer may be later in the reflector mails. Go to the M/S screen and right click on it. Doing so will give you the option of having it be a '10-minute' rule o