Hi all! Gonna set up my ft920 and my ft 847 for writelog. Now, for the ft-920: Should I use 6 pin data connection on my rig or the af out and phonepatch? ptt? same with the ft-847 data in/out plug or
Thank you for you answer, but I dont mean between radio and computer. I mean radio to soundboard. 73 Magnus _______________________________________________ WriteLog mailing list WriteLog@contesting.c
Hi! I am quite new with WL and uses a Yeasu FT-920. I wired it thru a Exodin interface to Patch in and AF out as recomended. If I am in SSB mode and press in my vox my tranciever will start transmitt
When you start up writelog it asks for your cordinates. Why not use the 6digit WWLocator instead (example EM64KO). With that alot of VHF contesters will start using writelog as well because many of t
I recently purchased Writelog but is not yet been using it as I been experimenting geting everything working. One thing is though that I have to get fixed before I can use it. It a bad hum/distortion
Hello Irek! I do use a transormer! 73 Magnus same played headset when have _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.contesting.com/ma
I have it connected to Patch in and AF out. Maybee the datajack will work better??? from RTTY voice would I _______________________________________________ WriteLog mailing list WriteLog@contesting.c
I dont know that yet, but so far, it is just using the mike directly to the radio that the problem occurs. 73 Magnus been come the I just the I problem but me. _______________________________________
I tried that too, and I tried with only 5 watts, still the same problem. Could it be that the problem goes away if I trancieve thru the comp (connect the mike to the computer instead of radio)???? An
Could be so if I get more problems in the future, but so far the mike is connected directly to the radio not via soundcard. Will look at your guess later if things work bad then too. TY 73 Magnus inp
Hi all! So, I have fiddled around alot and never seemed to get things right. Anyway, I found this great and helpable site of K9JY that helped me alot. So, I checked all the boxes except for master vo
I have entered my messages for CQ WW RTTY and everything is set to go, just one check - I close down WL and start it up. Even though I saved my file and saved configuration I came back to my startup
Hello! Been running CQ WW RTTY everything just working fine when all of a sudden people do not hear me? Some come back with "Great signal not understandable" Some "only letters- no numbers". I am usi
Hello! I am not sure if anyone has had this problem before, searched for it but no. I just got a interface hooked up on com port 1 and into my key jack at my ft-920. I got ports settings set as follo
Thank you Robert! That was half way there! I did not have the internal keyer in use allthough I did use the front jack for CW, should have used the back jack for CW and have the button bk-in engaged.
Installed my ft-847 today with writelog, it seems to work fine with RTTY and other digital modes but can get it to work with computer as DVK? Might have missunderstood the manual but like to know wha
Hello! Nobody has a FT-847 in use with Writelog? Maybee my question was not right at the start. Thru the dataport in the back of the radio it is possible to send and recieve AFSK, since AFSK is LSB a
Hi all! I keep getting this message but when I try to reactivate my account I get error messages. Why do this happen? And how can I get on the list again? 73 Magnus SM6WET -- Original Message -- From
Hi all! I plugged my interface to the dataport on the back of my rig but I can not seem to get it to work in AFSK. It works fine in FSK from Writelog but I like it to work also in AFSK. Someone has m
Hi! Writelog is just the greatest logginprogram and I installed it on my laptop to bring to our ZK1 expedition now in February. I do however have a problem. I use Writelog together with the Microham