Tnx Jon, Great Contest - Lots of Fun! Just what I was thinking. Eric - VE3GSI <Clip> _______________________________________________ RTTY mailing list RTTY@contesting.com http://lists.contesting.com/
Thanks Ron, Just unclear on one thing - Should we uninstall any or all of the N9OH modules already on the computer before heading into this upgrade? Like NSIS ONQP as an example. Regards, Eric - VE3G
Hi Bob, I will leave the RigBlaster questions to someone more familiar with that hardware then me. I have a PRO and prefer using the FSK features of the rig over an audio injected signal. This has be
Hi Jerry, If it is a previous worked call, I just press tab key (once) to get into the RCVD field and then use Ctrl+"W" to clear the old serial number. It saves a bit of time and after a few Q's it
Thanks for the heads-up Bill, I was just about to import my Makrothen log into DXBase 2004 when your message arrived. Sure enough the GRID: field was ignored by this programme as well. As you pointed
Hi Rick, I think you just need to use a master data base converter. If you go to www.dxatlas.com and look for addition programmes in the programmers corner you should be able to find a programme call
Hi Lee and Gang, Just a short not to say that I run WriteLog 10.41B on a Windows 95 Pentium 90 Toshiba notebook and 24 Meg of memory without a hitch on CW. The interface is a homebrew single transist
Can someone explain how the Multi+Keyer works as an Antenna relay device to me. My end game is to rewire my Ameritron RSC-8V remote antenna switch to be controlled by WriteLog. Am I looking in the ri
It looks like the UK-DX module is not scoring correctly. Hopefully the correct score will be calculated from the Cabrillo file sent to the Sponsors. I have dropped Steve, N9OH a note to let him know.
Can I blame the Makronthen module for not working properly on the cluster spots? When I click a spot my Icom changes frequency, but also goes to CW. Band color is wrong and color grabs are only ok in
CW with PK-232 gang, When I set up Writelog v.10.51M for CW contests using my Timewave PK-232 DSP I have three problems. In the port setup if I uncheck 'All modes PTT on CW port RTS" there is no way
Should he not have sent: W7/AL7W? Hi. I worked AL7W in RTTY Rounding and it scores as a new mult for Alaska. He sent (and is) in Oregon. How do I tell WL that this is not a mult? Rick W1TY __________
Mike and others, At one time I thought the problem could be duplicated buy double hitting the programmed Function Keys. I have a mild case of tremors in my hands and once in awhile I would double hit
A quick reply YES! Mine drops out too. The WORK-AROUND - at the top of window go to the menu Radio - Number of Radios, Choose 2 - put your cursor in the new radio entry window - then go back to the o
Yes there is such a thing as a dumb question and here it is. Almost all of the DX stations send CUT numbers for the exchange and Writelog will accept them. The dumb question is, do I copy them verbat
Could any of you fellows using a PK-232 for CW keying please check to see if you have QSK and let me know. I know for sure that QSK with the PK-232 was not work working with 10.57H nor is it with thi
Hi Joe, Earl and others, I think it has something to do with the way Writelog initializes a 'virtual' port. For example, using RTTY Write try to initialize a PK-232 on a USB virtual port (You do not
Hello Jerry, Without a doubt USB multi-mode interfaces are fast becoming the modern way to connect computers without legacy serial ports to the rig of choice. The RigExpert you mentioned is one means
Hello Jerry, Well I read you original post (as I bet did others) and I remember at the time that the Piexx name was a puzzle to me and I even looked it up on the internet. But since I was not familia
Hi Guys, There is nothing wrong with the way Jerry sets up for using one of two radios. For me I have two rigs but only one is used at a time, you might say it is for variety. Eventually I will have