Was this release a rumour or did I miss it? Eric - VE3GSI _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.contesting.com/mailman/listinfo/wr
I can verify that - de VE3GSI _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.contesting.com/mailman/listinfo/writelog WriteLog on the web:
GA Tom, Your question is a bit vague to me - no version - no contest and W4-43 does not look like a callsign I have ever worked at this station. Where are you trying to enter that call of W4-43? What
Hi Dick, I had the same error message and simply ignored it and update to the Cabrillo file still seemed to take without a hitch. My score of 2,213,380 has been sent off to the officials at ANARTS. C
I can pretty much echo Don's observations and also can add if you clicked some calls on the bandmap the rig would QSY and change mode to CW. The calls in my Rttyrite window did work for most of the c
Hello Cy, I see in my deleted e-mail you have only asked one question on the reflector this past month. That was to do with the rigblaster pro. At one time I used the original a RigBlaster and found
Ok Cy, An easy fix. This question has been asked a number of times on the reflector and even myself had to change the COM ports for my station set-up. One of the places to find this information on po
GM Cy, The rule for rig control from WL (or any logging program) to the Icom ProIII is simple. The protocol for Program and Rig must all be the same - no auto setting here. The address is the e-locat
An easy miss Dennis. If I have read you question correctly, you have missed turning on the second entry window. This is selected in the Number of Radios from the Radio drop-down menu (last item in th
Dick, Look for a file called: silence.wav in the \Program Files\WriteLog\Programs folder. Copy it to the default folder called: \WaveFiles The default \WaveFiles folder on my install is located in th
Also Rick, In my set-up, the first rotor is physically off north and I have to correct it in the .ini file. The second rotor is fine, but I have not found a way to do the correction independently (st
Did you get it Steve, I see your call on the band? I just unzipped (not run) the original full download, extracted the W1Full01.cab file to the install directory and upgraded that way... Worked like
Hi Gary, Not sure what is meant by the statement you referenced to, but I do have two Icom 756ProIII's and in the past have owned the original 756Pro and 756ProII. So I know those Icom rigs work just
Hi Phil, I noticed others have sent in a suggestion or two. Here is one more 'fix' I found on AA5AU's contesting site: http://rttycontesting.com/okrttyfix/ok_rtty_cabrillo_creation.html I have not tr
Hi John, I think you will find it is a polling issue with the something in set-up. I don't have a SteppIR (Yet!) but with the router s/w, WriteLog and the Icom Pro, mine works flawlessly at 9600 baud
Hi Barry, The Icom 756Pro3 is a selection in W/L under the Set-up > Ports > Rigs options. You only need to dabble in the .ini file if you wish to change slot assignments for ports addressed above com
A challenge for the super WL users: I was doing an experiment tonight and needed a way to have WL start with a choice of either a CW or RTTY profile, without making the changes to WriteLog set-up aft
Hi Hal, I suspect you are not using rig control or rig control is turned off, if that is the case then WL will default to phone and give you the 59 as the report. Options are, use rig control or if r
Thanks guys, Some days are just off for me - this was one of them. As many of you good fellows pointed out, and I should add, pointed out without making me feel a total fool. I had not read down the
Richard, I noted in another post you mentioned you use PC generated CW. Set-up with the WinKey option try again. I have run CW SO2R with the mH SO2R+ Keyer and don't remember your problem when set-up