Just got a new radio and setting up with software. I set the 7800 in the Setup box, but WL (10.53E) doesn't see the radio. Using COM7 and Auto for Baud. It works fine in DX4WIN, so I know my port set
Thanks for the note, Gary. Not only did I need to change WL to a number rather than Auto, I had to do the same thing in the 7800's menu. Changed it from AUto to 9600 and all is fine now. 73, Barry __
I solved the problem. Baud rate was set to AUTO by default in both WL and the 7800. When I changed both to 9600, it worked. I had already defined the ports. 73, Barry -- Barry Kutner, W2UP Newtown, P
I could clear my RIT with the * key on my FT1000D. It doesn't work on the IC7800. Was this function not implemented w/this radio (there is a software comd for it) or am I missing something? Tnx, Barr
In the 7800 there is a clear RIT cmd. It's 1A... 050091. Barry -- Barry Kutner, W2UP Newtown, PA _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://l
I don't know the difference, but the CI-V isn't necessary with the 7800. It has direct serial port access for cmds. Barry -- Barry Kutner, W2UP Newtown, PA ___________________________________________
I'm installing WL on a new computer (XP home) and keep getting a WRITELOG MFC Application error. Any ideas? Tnx, Barry -- Barry Kutner, W2UP Newtown, PA ______________________________________________
Hi all, I'm setting up a new computer that has no native serial ports. I bought a USB to 4 port serial port adapter which uses the Prolific chipset. It's not working properly. In DX4WIN, frequency co
My computer crashed during WAE and created a backup journal log file. I said yes when it prompted me to merge it, but it did not include the QTC info prior to the last autosave. Is there any way to a
Here's the problem... I'm setting up my laptop with my IC7800 for use with WL in CQWW SSB. I'm feeding the sound card audio in via pin 4 of ACC1 for sound card voice keying. This input does not activ
Jon, I"m not familiar with the Digi Keyer, but I have a similar setup and problem. I also replaced a 1000D with a 7800. Everything works fine in CW and RTTY, however the PTT doesn't work in SSB and r
I solved my constant PTT in SSB problem: I eanbled CW on COM4 for PTT purposes and it went keydown all the time. What I neglected to do was click and highlight "PC generated" CW. Even though I wasn't
I'm playing in the 10m contest, CQing on one freq, and tuning VFO B in Dual Wiatch mode while listening for an answer to my CQ. I hear someone I want to call on VFO B, so I press Split (like I used t
Frank, Maybe I has something to do with it. On Sat., uploaded a (130K QSO) 17 meg TQ8 file to LOTW. Looks like it took about 12 hours to process, as I uploaded an 800 QSO PSK31-only file right afterw
After operating the contest for about 30 minutes, I remembered why I used N1MM last year - every now and then, with no discernable pattern, the CW output turns into gibberish. I'm using a Dell laptop
It's on their web site: http://www.byterunner.com/tech.shtml -- Barry Kutner, W2UP Newtown, PA _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lis