WRTC2010 participants: Following up on my previous post: http://lists.contesting.com/archives//cgi-bin/mesg.cgi?a=WriteLog&i=7C61BC47 0702496BAD3BDF888886E953%40w5xdcp I have updated the module and p
If you are a developer of multiplier modules for WriteLog, or are a user of any multiplier modules (aka "contest modules") that are not installed by the WriteLog installer, this note is for you becau
The way this is supposed to work is bring up WriteLog's Sound Board Mixer controls from the Start menu WriteLog V10 group. In the middle on the bottom is a level control marked "Mic level". Note tha
Gary: Let me make sure I understand. You currently are running Vista and WriteLog works OK with a single sound board on it? I didn't think it would work properly at all. It certainly does not work re
All, I highly recommend that before you install using the new installer, that you uninstall the old modules. Why?.... as a completely different package as the new one. The fact that they share some
Yes, it is confusing because we (WriteLog and those with modules) have provided more than one way to succeed at getting things to work. So there probably is no "best way", but there probably is an "
is sure All the above applies to Vista and later only (the only OS's with a VirtualStore). I don't know what is going on with MMTTY's USERPARA.INI, but I can help try to avoid chasing some wild gees
where whatever You must first run WriteLog as the user you want (N7US in your case) and do "something" that causes it to write into writelog.ini. At that point the OS will create your VirtualStore v
Track down your writelog.ini file (XP and earlier it is in the Windows system folder, Vista and later it is in the VirtualStore, something like this: C:\Users\<username>\AppData\Local\VirtualStore\W
I moved 3 of my Users should I also If you remove or move any files placed in WriteLog's \Programs directory by its installer, the punishment will be forceful and swift. WriteLog will quit working.
WriteLog users, After reading the reflector traffic a few weeks ago, I figured I needed to do a detailed test of WriteLog using MMTTY. The short story is that nothing that people reported broken appe
For current versions of WL, the SM6SRW modules should be installed using the instructions you find here: http://writelog.com/downloads/third-party _______________________________________________ Wri
All, The Texas QSO party module supports an "ARRL File Format" save option, but the menu entry that does that is missing in recent WL versions if you open the .WL file as WriteLog starts up. (This is
WriteLog supports the real time scores poster at: http://www.getscores.org/PostingApps/WLPoster.aspx Not mentioned on that page is the fact that WriteLog is installed with a file WritelogIARU.gus tha
This issue has been discussed numerous times over the years. Reasonable people my differ on whether the above is proper behavior by the program or not, but I want to point out that reasonable people
The quest to find wl_cty.bin has found its way into numerous postings on this list, but no one has found the answer yet. I am sure I should just type the answer into this email, but I will offer hint
OK, I see I only confused the matter. But I really don't have much to add over what is in the help file. Let me start with the simple thing and repeat the info in the latest help file: the only thing
Gary, I assume you are running 10.77 or later. If so, something has gone seriously wrong in your installation and we need to take this up offline. Wayne _____________________________________________
The problem that I learned is that if you had WL version 10.76 or earlier installed on Vista and then upgraded WL to a newer version, the documented way of upgrading your country file data base did n
I have some comments on the numerous postings about problems with CW keying:. In Writelog's Setup/Ports menu, there currently 7 different entries under "CW keyer type". Three of the settings, "Microh