When sending a spot from WL thru DX-Telnet, the spot never makes it through the process. I see the following message on the DX-Telent screen: <dxs> DX Summit IRC command interpreter <dxs> cp: cannot
You may be transmitting upside down.. I think I had that problem. Go to TUtype -> TNCsetup and select FSK polarity opposite from what it shows and then ty it out. Dave W7DPW if you could contact me d
As I recollect RY is an alternating Mark Space combination in order to set the limits for cortrect printing. When a RY sequence is sent, the Ranger finder is adjusted to the limits of good print and
The UART takes the 5-bit parallel Baudot code and converts it into a serial stream and its start(1) and stop(1.5) bits on transmit and conversely on Receive, it converts the 5-bit serial code, along
The 2000 FMRE rules showed MICHOACAN as MC and this years rules show it as MIC.. I dont have the rules for 2001 on hand. I noticed the difference when earler when getting set up for the contest. Dave