_________________________________________________________ It worked for me. Be sure you have it spelled correctly... Here's what mine looks like: CtCompatibleAccel=YES I don't know if it is case sens
I feel like I'm wearing out this reflector lately... <g> I have WriteLog set up to use with RiTTY by K6STI and it seems to be working fine except for one thing: When I want to stop a transmission, pr
_________________________________________________________ Is the beep from the computer or the radio? I know you're using TS-870S's. Be sure menu selection 35 is set to off. I had the same thing here
_________________________________________________________ Yes, the friend.ini file uses the %H command, explained on page 135 of the manual. 73, Bill W7TI
_________________________________________________________ FWIW, I did a search for that file and it's not on my HD, and WriteLog works fine. In cases like this, I usually just reinstall. 73, Bill W7T
_________________________________________________________ FWIW, I had this same problem in a TS-850 I used to own. When calling CQ, stations would come back to me consistently about 100 Hz low. After
_________________________________________________________ I had the same problem and finally figured it out. I had rig control done by software and apparently the polling interval is too long. Change
For next year's contest, is it possible to "reuse" the previous .wl file after deleting the contacts? I tried it to see what would happen and got a couple of error messages. Apparently WriteLog doesn
_________________________________________________________ Someone should smack ICOM's wrist over this one. Yaesu, too. Kenwood radios all use the same addressing scheme. Set up one, you setup all. An
_________________________________________________________ That's exactly what I did with my .wl file from the XE contest, and it completely trashed WriteLog to the point where I had to do a complete
_________________________________________________________ This was only my second contest with WL, but I haven't seen that problem. In cases like that, I'd suspect RF getting into the keyboard. Try r
_________________________________________________________ Cabrillo logs do not have to have time marked in them. The software the log checkers use figures it automatically. You still need to track ti
_________________________________________________________ Ok, I'll give you that. I don't run multiple rigs, so the Kenwood advantage of one standard doesn't apply. What's needed is a single standard
_________________________________________________________ You have aroused my curiosity. Under what circumstances would you send a serial number lower than a previous one? I can't recall ever doing t
_________________________________________________________ In your writelog.ini file, under [Ports], but the following line: CW_ON_PIN1=1 Don't know why that fixes it, but it does. Did for me. 73, Bil
_________________________________________________________ I agree, it's time for action. Trade 'em the whole 440 band for 300 kHz exclusive on 40 meters. 73, Bill W7TI