Gee, with 2 radios and 2 soundcards, you can sure do some interesting things! http://wa9als.mystarband.net/mixwin.gif - This shows transmitting with the 706 and MMTTY via the Soundblaster and receivi
If they are not there, you can add them - Be careful typing - It's CommSlot. Not ComSlot as you have once below. Here's mine: [Ports] COM1:=9600,n,8,1 COM2:=9600,n,8,1 COM3:=9600,n,8,1 COM4:=9600,n,8
This looks interesting IF you have one close - the shipping is $21! Hopefully I can get one in Indy and check it out with WL. http://www.compusa.com/products/product_info.asp?product%5Fcode=272121&cs
There's a show which computer made the qso somewhere - 2 computers show as 0 and 1 in the log - way over to the right end of the record. 73 - via wireless iPAQ on home LAN --Original Message--
I had success this weekend with WriteLog and MMTTYx2 with 2 soundcards. I plan a more clear/detailed explanation of this, but can't resist a couple of comments now, prompted by Dick's comments! I had
Something's amiss because my WIN2L prof starts and stops MMTTY standalone or plugin in 2 sec or less. Dell 1.3G with 256K... ?? Thus I don't think it's the WIN2k at the root of the longer times. 73
quit If you have your computer time set for UTC, you then need to go into the computer's time setup and tell it you live in Casablanca (so you won't have to worry about daylight savings there). Then
Billy, you should be duping your questions to the Icom list too. I'm not familiar with the 761 - using the PROII and have also used the 706 and FT-1000MPs, in both FSK and AFSK. It sounds like you ha
I have 2 transistor interfaces like you describe built into a box with stereo 1/8 inch jacks on the input and output side of each. Sometimes I use them for PTT/FSK and sometimes for PTT/CW, giving me
I'm not sure, but I think it only happens with MMTTY? Thus probably not RFI. I know W9OL was using MMTTY. I've had the problem on rare occasions - hangs with a solid tone for a few seconds, but final
Duane, did you get the latest firmware as posted recently by Joe? I thought that was basically addressed to this problem? I had the same problem in RU this year. Occasionally, and randomly, the TX wo
Wayne can't satisfy every individual. Check out Macro Express - with that, you can do essentially anything with your key functions. Doesn't seem necessary to me, but it's there for those that want it
not Does the FT-990 allow the use of narrow filters in LSB mode? If not, that's it. Funny, the 1000MP did allow that, but the newer MARK-V 1000MP does not. If this is the problem, use the PACKET jac
Larry, the serial number goes in the QTH field. It shoud go there automatically when you click the number in the exchange. (State or serial number goes into the QTH field.) 73
I think the field length is MINIMALLY as wide as the name of the field, so "EXCHANGE" would be wider than even our best ops would need for a seria number! HI If you look closely using Exchange Param
I had a very bad experience with a Byterunner PCI card in a Gateway P5-166 computer. It was their 8-port PCI card. It would not install properly. I talked with their tech service on the phone. After
Goetz, for the contest you're operating, go to Setup|SuperCheck Partial, and a Properties window will come up. Here you can indicate the PATH to the .dta file that you want to use, e.g. the RTTY.DTA