Tim, you don't leave me much room for discussion ("end of story")! ;-) I will disagree quickly and then go away. There are a lot of "silent" reflectors - e.g. the RITTY (K6STI) reflector and the WJ2
me! I don't normally use the Windows choice Start|Run... If you type writelog.ini in the "Open:" window there, it will bring up the ini file in Notepad. It will then remember that is what you want f
S&P the Gil, there are many ways to use WL. After a couple of years, I learn new things all the time. Here's one way to do it: S&P: F4 sends my call. He answers. F5 sends the exchange to him. After
displays They are used to send PTT and FSK keying to the rig. (NOT AFSK) What "TNC" do you have checked? You need one of the AFSK soundboard choices if you are outputing to your mic. If you use FSK
one Heck, I see it in reverse - I don't see how you can watch 2 computers and monitors. I've never been any good at it, but I've had SO2R going on a single computer and single monitor. No problem to
So if you do that: 1. Can you still click on the AFC button on the plugin control panel to turn it on? 2. And if so, does it STAY on? I not only had it coming on when I didn't want it, I also had th
Gil, have you read about it? Of course you can, Juan - See www.qsl.net/wa9als/dxtelnet.htm for details. Once you start DX Telent, it will export spots to both DX4WIN and DX Telnet or BOTH at the sam
a This can be made even easier by using the Launcher program that comes with DX Telnet. Launcher is just a Windows program that "launches" batch statements like you might make using a DOS bat file.
One of my computers is a 7 yr old Gateway P5-166, upgraded to 48K RAM and two 20 GB HDDs (came with 16 MB RAM and 1.2 GB HDD). The HDD's came with software that allowed them to be used to WIN98SE (E
Actually, Gil wrote the above! HI Gil, RTS should be OFF during Receive. I don't use DTR, but I assume it's off also. Something's weird about your setup. If you have a RS-232 tester, put it inline a
asserted. Gil, you must be the only one on this side of the Milky Way with the "problem" you describe, but I noticed something in the HELP file that might pertain: "To prevent WriteLog from putting
I 1. Get FKeys - http://www.wb6big.net/fkeys.htm 2. Program the titles of the log entry window - They are buttons that can be loaded with macros by shift-left-clicking on the button. Enter your macr
fsk If you click on AFSK or FSK, those are sound board options - You are telling it to use the soundcard as your TNC. You don't want that if you are using the KAM. When I What port is the KAM on? (H
Gil, you have more problems than Carter has pills. For a single PC, if you do it as described at www.qsl.net/wa9als/dxtelnet.htm, it will work. The link window opens every time, the spots go out, eve