I run my pc on local time (I know, I know...). I'd like to put a clock on my screen that shows UTC. The one's I've seen all key off local time and that's all they'll display. Is there one that is sma
I couldn't get "ALTrz" (hold ALT, r and z keys simultaneously) to move the rotor...is it broken? Had to use the mouse to click on radio and and then "Move Antenna to..." Would also like a way to STOP
I'm once again struggling with the issue of soundcard interfaces. My problem is that the interface units (Tigertronics, RigBlaster, and the one by the Digipan guys) are described differently enough t
It seems that the Ten Tec Omni-6+ rig driver is pretty minimal in its functionality. Changing bands brings you to the bottom of the band, resets filters, etc. You can't clear the RIT or do other thin
Now that I have the Rotor-EZ hooked up, is there a non-mouse-click way to get the rotor to move to a specific direction using a function key? I vaguely remember that there is a keystroke (ctl-alt-z?)
During the IARU contest this past weekend, I was reminded of how many of the features of my Omni-6+ I couldn't control from WL, including: - Filters on/off - RIT and clearing the RIT - Going back to
On my behalf and with a little bit of grovelling, Allen Huber, WG3E, wrote a module for the PVRC On-Air Reunion and sent it to me tonight. It's a .dll file that I've put in my \ham\programs directory
I've just installed a ROTOR-EZ and have it configured. 2 questions re:operation during a contest (I've already configured the unit in the 'setup|ports menu) 1. Does the rotor move autmatically when I
When I try and use hte RTTY window in 10.24G, I get "Can't Open Sound Board for Receive" as an error message. Nothing else sound-related is running. Not sure what's happening.,.I'm able to decode wit
I'm curious to know what setting people are using to record receiver audio with Writelog. I'm hoping to record my (meager?) participation in this weekends's contest, and need to budget disk space! In
Using WL with my Ten Tec Omni-6+ this weekend for the ARRL DX contest, I ran into some interesting problems. I'm hoping they were a result of pilot error, but one never knows! My computer is a Gatewa
During the ARARL DX contest last weekend, I deleted a dupe from my log. There is now a missing number in my log. How do I renumber the remaining log (sequence numbers) or don't I? Thanks, Eric W3DQ W
I have a Byterunner PCI-400 4-port PCI serial card that I successfully used in my old P1/166. I can't get it to work on my P3/550 machine, where the card provides com 3-4-5-6... I can trigger the PTT
Thanks for all your suggestions. I put the card back in the machine where it worked and replaced it with a SIIG card which worked right off the top! Now I see why folks call Plug 'n Play "Plug 'n Pra
I suspect someone's done this already, but I need explicit instructions on how to set up the recording capabilities in WriteLog. I've never used this function, and was reminded of it in K3NA's writeu
"The PCI128 really is less sensitive than the PCI16. I could not record my voice wave files with adequate volume and due to having only one mixer, everything you do on the input side effects the outp
I have a new (to me) Gateway GP7/550 computer. The fan is awfully loud. Is this normal with a P3? My HP P1/166 was awafully quiet in comparison. Can anyone suggest a method to quiet it down? Gateway
Finally have tome to wire everything up. I use Com 1 for rig control I'd like to use COM2 for PTT for the RigBlaster when I'm using the sound card playback. I don't trust myself and vox (I have littl