I'm curious to know how this file/database is used. I don't see it anywhere in the documentation. During SS last weekend, I got a lot of "thanks, Eric" calls from stations I don't know... obviously,
USB 2.0 would be great, but don't forget USB 1.x -- there are LOTS of us out here withmachines that only support <USB 2.0 Eric W3DQ Washington, DC At 07:09 PM 11/11/03 -0800, Les, VA7LC wrote: Seems
For the 160 contest, KV4FV didn't give a section, just a signal report. Writelog didn't seem to know how to score it. Suggestions? Thanks in advance, Eric W3DQ Washington, DC ________________________
I agree with Eric. The additions being suggested are all interesting and could certainly be implemented.. but only if, as Eric states, "as long as there is a way to turn it off!" That's the key! One
I had lots and lots of WL crashes this past weekend. It seemed that every time I tried to 'save configuration' the program crashed and trashed my Witelog.ini file. Spent lots of time re-creating the
I've used it. What I'm looking for is something that lists ALL of the configuration information and then has a check box (yes/no) or blank field (parameter setting). Eric W3DQ At 08:49 PM 12/16/03 -0
I'min the 160 contest and other than DX stations, all I get when I put ina state is UNKNOWN MULT and no points! The log shows a ? for every US sentry inteh M colum. What happened? ERic W3DQ Washingto
Figured it out... the log was in the wrong directory... needs to be in "programs" -- all is cured! AARGH! Eric W3DQ At 03:17 AM 1/24/04 -0500, Eric Rosenberg wrote: I'min the 160 contest and other th
I've upgraded from W98SE to W2KPro -- what a difference (no crashes or other weirdness)! It's time to get WL to work with the parallel ports... I realize I need to add 3rd party software to get thing
1. How do I print out the shortcut list? 2. How can I add or change keystrokes that already exist within WL (e.g. CW window and Move the antenna) ? Thanks, Eric W3DQ Washington, DC __________________
Barry -- I have this (thanks, Eric). I was wanting to print out the configurable shortcut list. reachable through the pull-down menus. Eric W3DQ At 08:02 AM 1/30/2004 -0500, Barry N1EU wrote: W3DQ as
changes to WL I'd love to see -- some new, some previously mentioned: 1. Abilility to have the bandmap run horizontally. 2. A "training" or "practice" mode -- I'd like the opportunity to practivce b
It seems to me that all of the Omni-6+ s/w control capabilities are not in WL. How can I check what is covered and what's not (like, for example, clearing the RIT). I have the protocol spec if anyone
I, too, had some issues with WL this weekend. No crashes, no signifcant problems. Here's my list. - Rotor Control. Didn't work from the keyboard. This has been an intermittent one... working in some
Would have loved to be able to see both VFOs when operating split during the ARRL SSB contest this past weekend. Does anyone know how I can configure WL to do this? Thanks in Advance. Eric W3DQ Washi
Responses to Eric's comments.suggstions.... At 12:39 PM 3/11/2004 -0500, Eric Scace K3NA wrote: I can comment on a few of Eric's items, and hope others will have additional suggestions. - Split windo
I can't seem to get this to work. Have the SB LINE IN going to the Audio Out (the white jack on the Aux I/O cable) from the Orion I have RECEIVE SELECTION set to Line In for WL's Sound Mixter Level C
Running WL 10.48F on a P3/600 and Win2kPro, I've run into two problems when using the soundcard to decode CW. - even though the input is MONO (using one radio), the decoder only works when I have cho
I've noticed in the 3830 email reflector posting, folks are posting a myriad of statistics -- hour-by-hour (by band), # of Q's per mult (or state or other defined region), etc. Is there a way either
Thanks to all who responded. The one report I'd like is a listing of states and the number of Q's per. I've seen this posted, yet it appears that WL can't do this, even under "create reports" What am